ProForm PETL71707.0 Operation and Adjustment, PRE-LUBRICATED Walking Belt, RCD-equipped outlets

Page 11
Adapter
Cover
2 Screw
Socket on Treadmill
1

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric cur- rent to reduce the risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord. See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Press the pins on the power cord into the metal clips in the adapter as shown. Close the adapter cover over the end of the power cord and tighten the screw in the adapter. Important: Make sure that the adapter cover is secure and the screw has been

tightened before using the power cord.

Pins

Adapter Metal Clips

See drawing 3. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. Important: The treadmill is not compatible with

RCD-equipped outlets.

3

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

11

Image 11
Contents Model No. PETL71707.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Repeat this step on the other side AssemblyMake sure that the power cord is unplugged Wheel must turn freely Do not overtighten the Nut the Base Wheel must turn freely Careful not to pinch the Upright WireTighten the Bolts yet Not fully fold the Frame yetScrews and then tighten them This step is completed Sleeve to make sure that it is locked intoPlace Have a second person hold the Frame untilPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Tightened before using the power cordFeatures of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Distance/Incline dis When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Time display-WhenMonitor your progress with the matrix and the displays HOW to USE a Preset WorkoutSelect a preset workout Customize your workout if desiredOptional Chest Pulse Sensor Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Problem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PETL71707.0Exploded Drawing A-Model No. PETL71707.0 R1207A Exploded Drawing B-Model No. PETL71707.0 R1207A Exploded Drawing C-Model No. PETL71707.0 R1207A Exploded Drawing D-Model No. PETL71707.0 R1207A Recycling Information Ordering Replacement Parts