ProForm 590 lt Nected PROPERLY, the Console MAY, Be Damaged When the Power is, Turned on

11. Attach the Left Handrail (21) to the console as-

sembly with three #8 x 3/4" Screws (1). Start all

three Screws before tightening any of them;

do not overtighten the Screws.

Remove the ties from the M8 Cage Nuts (39). If

necessary, press the Cage Nuts back into place.

12. Have a second person hold the console assem-

bly near the Right Upright (80).

Connect the Wire Harness (92) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS

TURNED ON.

Remove the wire tie from the Wire Harness (92).

Then, insert the connectors into the Right Upright

(80).

11	1
21
39	1
	Console
	Assembly
12	Console Assembly

Set the console assembly on the Right Upright

(80) and the Left Upright (not shown). Make sure

that no wires are pinched.

92 Console Wire

Wire Tie

80

Console

Wire

92

11