ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and Phillips screw-
driver .
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity needed for assembly. Note: Some small parts may have been
M8 Nylon | M8 Split | M10 Split | M4 x 16mm | M4 x 22mm |
Locknut | Washer | Washer | Screw | Screw |
M10 x 20mm Button | M10 x 74mm Button Screw |
| ||
|
|
| ||
Screw |
|
|
|
1.Identify the Front Stabilizer (2), which is narrower than the Rear Stabilizer (not shown). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 74mm Button Screws (33).
1
1
2
33
4