5.The Console (6) requires four “D” batteries (not included); alkaline batteries are recommended.
IMPORTANT: If the exercise cycle has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console dis- plays or other electronic components may become damaged. Press the tab on the battery cover and remove the battery cover. Insert four batteries into the console; make sure that the batteries are oriented as shown. Then, reattach the battery cover.
6.While another person holds the Console (6) near the Upright (3), connect the console wire harness to the Upper Wire Harness (32).
Insert the excess Wire Harness (32) downward into the Upright (3). Attach the Console (6) to the Upright with four M4 x 16mm Screws (41). Make sure that the
Wire Harness is not pinched.
7.Attach the Seat (12) to the Seat Post (5) with four M8 Nylon Locknuts (37) and four M8 Split Washers (36).
Note: The Nylon Locknuts and Split Washers may be preattached to the Seat.
5 |
|
| 6 |
| Batteries |
| Battery |
| Cover |
| Batteries |
6 | Console Wire |
| |
| Harness |
| 41 |
| 6 |
41 | 32 |
| 3 |
7 |
|
| 12 |
| 5 |
| 36 |
| 37 |
6