15.Slide the Weight Carriage (47) onto the Lat Tower (9).
Make sure that the Weight Carriage is oriented as shown.
Slide the loop on the Cable (45) onto the M10 x 19mm Bolt (46) in the Weight Carriage (47). Attach the Cable with an M10 Nylon Locknut (11).
Next, slide the Carriage Stop (24) onto the Lat Tower
(9). Make sure that the Carriage Stop is turned so the lip of the Carriage Bushing (2) is on top. Attach the Carriage Stop to the indicated hole in the Lat Tower with the M8 x 70mm Bolt (48) and an M8 Nylon Locknut (13).
16.Insert the Lat Tower (9) into the Front Leg (19). Make sure that the Lat Tower is turned as shown.
Secure the Lat Tower with the Adjustment Knob (36).
15 |
|
|
45 |
| 9 |
|
| 46 |
11 |
|
|
|
| 47 |
|
| 13 |
| 48 | 2 |
| 24 | |
|
| |
16 |
|
|
| 9 |
|
|
| 36 |
| 19 |
|
11