ProForm manual Part Identification ChartÑModel No. PFBE64490 R0999A

Page 5

Part Identification ChartÑModel No. PFBE64490 R0999A

16mm x 18.5mm Spacer (8)Ð2

M6 x 16mm Screw (3)Ð4

Pulley Spacer (41)Ð2

M6 x 38mm Screw (4)Ð4

Leg Lever Spacer (50)Ð1

M6 Washer (30)Ð5

M8 Washer (23)Ð2

M10 Washer (6)Ð5

M8 Nylon Locknut (13)Ð2

M10 Nylon Locknut (11)Ð20

M6 x 63mm Screw (7)Ð1

M8 x 64mm Bolt (43)Ð1

M8 x 70mm Bolt (48)Ð1

M10 x 19mm Bolt (46)Ð1

M10 x 62mm Carriage Bolt (33)Ð8

M10 x 68mm Bolt (34)Ð8

M10 x 75mm Bolt (60)Ð1

M10 x 155mm Bolt (22)Ð1

5

Image 5

Contents Mon.ÐFri., 6 a.m.Ð6 p.m. MST Model No. PFBE64490 Serial NoCustomer HOT Line Table of Contents Important Precautions Right Side Before You BeginLeft Side Part Identification ChartÑModel No. PFBE64490 R0999A Assembly Crossbar is turned so the decal is facing up While a second person holds the Right UprightTighten all M10 Nylon Locknuts used in steps 1 through Tighten the M6 x 63mm Screw Do not tighten the Screw yetPage Make sure that the Weight Carriage is oriented as shown Make sure that both Weight Rests are at the same height Using the Weight Rests and Safety Spotters Adjusting the Weight BenchAdjusting the Backrest Adjusting the PAD Tube Make sure that you fully tighten the Adjustment KnobAttaching Weights to the LEG Lever Attaching the Curl Post or LAT TowerAttaching Weights to the Weight Carriage Adjusting the Bench for Squat ExercisesAttaching the LAT BAR to the LAT Tower Exercise Guidelines Staying Motivated Muscle ChartCooling Down Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateQty Description Part ListÑModel No. PFBE64490Exploded DrawingÐModel No. PFBE64490 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty