HOW TO USE PRESET PROGRAMS
1 Begin pedaling to activate the console.
See step 1 on page 10.
2 Select one of the six preset programs.
When the power is turned on, the
manual mode will be selected. To
select a preset program, press the
Program Select
button repeatedly until “P1,” “P2,” “P3,” “P4,” “P5,” or “P6” appears in the lower display.
When a preset program is selected, the matrix will show the first six resistance settings of the program.
Press the Program Start button or begin
3 pedaling to start the program.
Each program is divided into several time seg- ments of different lengths. One resistance setting is programmed for each segment. (The same resistance setting may be programmed for two or more consecutive segments.)
The resistance
setting for the first segment will be
shown in the flash- ing Current
Segment column of the matrix. The
resistance settings for the next five
segments will be shown in the columns to the right.
When only three seconds remain in the first seg- ment of the program, a series of tones will sound; all resistance settings will then move one column to the left. The resistance setting for the second segment will then be shown in the flashing Current Segment column and the resistance of the pedals will automatically change to the resis- tance setting for the second segment.
The program will continue until the resistance set- ting for the last segment is shown in the Current Segment column of the matrix and no time remains in the program.
Note: During the program, you can override the resistance setting for the current segment by pressing the Resistance buttons. However, when the next segment begins, the resistance will auto- matically change if a different resistance setting is programmed for the next segment. If you stop pedaling for several seconds, a tone will sound and the program will pause. To restart the pro- gram, simply resume pedaling.
4 Use the pace (RPM) guide.
During preset pro- grams, the pace guide will prompt you to increase or decrease your ped- aling pace. When one of the indica- tors on the left side of the pace guide lights, increase your pace; when one of the indica-
tors on the right side lights, decrease your pace. When the center indicator lights, maintain your current pace. Important: The pace settings of the program are intended only to provide a goal. Make sure to pedal at a pace that is comfortable for you.
5 Monitor your progress with the two displays.
See step 4 on page 10.
6 Measure your heart rate if desired.
See step 5 on page 11.
7 Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the console
8 will automatically turn off.
See step 7 on page 11.
12