Suunto None manual FAQs, Battery replacement and strap kits must be used, Warranty

Page 43

The water resistance of the unit must be checked after replacing the battery or after other service operations. The check requires special equipment and training. You must frequently check the transparent battery compartment cover and the display for any sign of leaks. If you find moisture inside your dive computer, there is a leak. A leak must be corrected without delay as moisture will seriously damage the unit, even beyond repair. SUUNTO does not take any responsibility for damage caused by moisture in the dive computer unless the instructions of this manual are carefully followed. In the event of a leak, immediately take the dive computer to an authorized SUUNTO dealer or distributor.

FAQs

WHAT CAN I DO TO MY SUUNTO DIVING COMPUTER MYSELF?

NOTE

It is advisable to contact an authorized Suunto service, distributor or

 

retailer for any repairs. Batteries and straps can be replaced by the

 

user when the change is made in a proper manner to avoid any

 

leakage of water into the battery compartment or computer. Original

 

battery replacement and strap kits must be used.

Batteries can be changed by the user in all diving computers except Stinger, D4, D6 and D9.

Instructions for changing batteries and straps can be found in the user manuals or at www.suunto.com and the user videos there.

WHAT ARE ORIGINAL SUUNTO ACCESSORIES?

Original Suunto accessories are only distributed through Suunto`s worldwide network of authorized Suunto distributors and retailers.

Original Suunto accessories are tested to be compatible with Suunto products and can be used safely.

NOTE

Damage caused by non-original accessories will not be covered by

 

warranty.

HOW TO GET MORE INFORMATION

You can find service & warranty information in these pages by searching the FAQs.

If you do not find the answer in the FAQs, you can also send a support request. To be able to send a support request you have to register in the system. REGISTER NOW. You can also contact our European help desk by telephone at +358 2 284 1160. The cost of the call is that of a normal call to Finland. The call center is open Mon-Fri, 24h/day. The service is provided in English all the time. Other languages - French, German, Swedish, Japanese, Spanish and Finnish – are only provided during local business hours. Call center professionals can answer customer questions regarding diving products, outdoor products and compasses.

HOW DO I KNOW IF MY SUUNTO PRODUCT IS COVERED BY WARRANTY?

You can check the proof pf purchase, which has to be 2 years or less. You can also check the serial number of your unit.

Does repairing my Suunto product extend the warranty?

As far as the national laws permit, repairing the product does not extend or otherwise affect the warranty period. However, part(s) repaired or replacement product(s) provided during the warranty period will be warranted for the remainder of the original warranty period or for three (3) months from the date of repair or replacement, whichever is longer.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents COBRA3 Time Tank pressure Before Diving Intellectual Property Welcome to the World of Suunto Diving Instruments That tend to increase the risk of decompression illness DCI Before DIVING. Make sure that you fully understand the useSerious injury or death Not for Professional USE! Suunto dive computers areDives That Require Decompression Stops are not Before the instrument has counted down the no-fly time Nitrox mode, as well as from AIR or Nitrox mode to GaugeMode even during the no-fly time Batteries. Recycle or dispose of used batteries properlyNavigating in the menus Button symbols and functionsSymbol Button Press Main functions Suunto AT a GlanceDown Setting the date Time mode settingsSetting the alarm Setting the timeAC water contacts Setting the unitsSetting the backlight Setting the tonesLocking a bearing Learning how to use your compassDisplays by pressing the UP/DOWN buttons Compass displayCompass settings Symbol ExplanationCalibration Time-out DeclinationDive computer limitations Before DivingSuunto RGBM/Deep Stop Algorithm Emergency ascentsNitrox Audible and visual alarmsAlarm type Preset alarm types Alarm typeOmitted decompression Alarm type Alarm reasonAlarm is activated Error conditionsSetting the dive-time alarm Connecting Suunto Cobra3 to a regulatorDive mode settings Setting the depth alarmAre stored until changed Setting the nitrox valuesSetting the personal/altitude adjustments Bottom time, for exampleSetting the tank pressure alarm Setting the sample rateSetting the Safety Stops/Deep Stops Setting the Rgbm valuesDive mode activation Accessing Dive modeActivation and pre-checks How the Altitude value is set Battery power indicationAlt. adjustment value Altitude range Diving at altitudePersonal Condition Desired tables Adjustment Value Personal adjustmentsRgbm setting Desired Tables Effect Recommended Safety Stops Safety StopsMandatory Safety Stops Deep stops Basic dive data Diving in AIR mode DIVEairDiving Order to perform the necessary dive pre-checksTank pressure data BookmarkLow Air Pressure Warnings Ascent rate indicatorDecompression dives Display below the floor Ceiling, ceiling zone, floor and decompression rangeDisplay at the ceiling zone Display above the floorDisplay above the ceiling Oxygen displays Diving in Nitrox mode DIVEnitroxBefore diving in Nitrox mode Default nitrox settingsOxygen limit fraction OLF Diving in Gauge mode DIVEgaugeGas change and multiple breathing gas mixes There is no ascent rate monitoring in the Gauge mode Gauge mode does not provide decompression informationModes before the no fly time has counted down Dive numbering Alarms Symbol on displayAfter Diving Surface intervalDive Planning mode PLANnodec Plan modeFlying after diving Dive Simulator Simulation Mode PLANsimulatorMode Dive numbering shown during dive planningDive logbook MEMLogbook Memory modeNumbering for further information Providing that the battery has been replaced according toInstructions Dive series if the no-fly time has not ended. See .2. DiveSuunto Dive Manager SDM Unit and the downloadable Suunto Dive Manager softwarePage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving ComputerBattery replacement and strap kits must be used FAQsWarranty Required tools Battery ReplacementBattery kit Replacing the batteryBattery compartment lid, indicating a leak Technical Data Suunto Rgbm adaptive decompression RgbmNo-decompression limits Diver Attention Symbol Advice to Extend Surface IntervalOxygen exposure Altitude divingCopyright Trademark Intellectual PropertyPatent notice User’s responsibility Disclaimers12.2. CE Exclusions and Limitations Warranty PeriodOther important notices Access to Suunto warranty serviceLimitation of Liability Page Disposal of the Device EAD EAN GlossaryNoaa Copyright Customer Service ContactsTWO Year Warranty Suunto Oy 9/2008, 10/2008, 11/2008
Top Page Image Contents