JVC GVT0077-008A manual CD Synchronized Recording, CD Direct Recording, Press CD REC Start

Press 0EJECT to insert a recordable cassette in with the expose part of the tape down.

Load CDs.

CD Synchronized Recording

By using CD Synchronized Recording methods, you can start and stop a CD play and tape recording at the same time.

CD Synchronized Recording consists of the followings:

7CD Direct Recording

7Auto Edit Recording

7CD Direct Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program Play.

On the unit ONLY:

1

To stop recording, press 7to create a 4-second blank portion on the recording tape. (Remember a 4-second blank is important when using Music Scan—see page 21.)

To record on both sides—Reverse Mode

On the unit ONLY:

Press REVERSE MODE so that the Reverse Mode		REVERSE
		MODE
indicator on the display lights up like—	.

•When using the Reverse Mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be re-recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator on the display lights up like— .

2

3 Press one of the disc number (CD1, CD2, and CD3) buttons to select the disc, then 7.

•If you want to make a program, perform steps 2 to 5 on page 18. After making a program, go to the next step.

CD3

CD2

CD1

4 Press CD REC START.

CD REC

START

“CD REC” appears on the display and the REC (recording) lamp flashes when

recording starts.

The cassette deck starts recording while the CD player starts playing.

When the recording is done, “CD REC FINISHED” scroll through the display, and the REC (recording) lamp goes off. Both the cassette deck and the CD player stop automatically.

– 23 –