3.Press FM/AM PRESET 5 or ∞ to select a channel number while the channel number position is flashing.
| ANALOG | TUNED STEREO |
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
Selecting the FM Reception Mode
English
4. Press MEMORY again while the selected channel number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5.Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored one
To tune in a preset station
On the front panel:
When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.
•You can store the FM reception mode for each preset station (see page 21).
While listening to an FM station, press FM MODE.
•Each time you press the button, the FM reception mode alternates between “AUTOMUTING” and “MODE MONO.”
| ANALOG | TUNED STEREO AUTO MUTING |
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
| ANALOG | TUNED |
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
1. Press FM or AM to select the band.
The last received station of the selected band is tuned in.
2.Press FM/AM PRESET 5 or ∞ until you find the channel you want.
•Pressing FM/AM PRESET 5 increases the number.
•Pressing FM/AM PRESET ∞ decreases the number.
From the remote control:
1. Press FM/AM to select the band.
The last received station of the selected band is tuned in.
•Each time you press the button, the band alternates between FM and AM.
2.Press the 10 keys to select a preset channel number.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 20, press +10 then 10/0.
•For channel number 30, press +10, +10, then 10/0.
Note:
When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 42.)
AUTOMUTING: Normally select this.
When a program is broadcasted in stereo, you will hear stereo sound;
when in monaural, you will hear monaural sounds.
This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display. (Initial setting)
MODE MONO: Select this to improve the reception (but stereo effect will be lost).
In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display. (The STEREO indicator also goes off.)
Note:
When you use the FM MODE on the remote control, be sure that it is activated for the tuner, not for the CD and others. (See page 42.)
22