JVC RM-SRX7032U Release TV, Try to operate your TV by pressing TV, For TV Manufacturer Codes

Page 48

English

Operating Other Manufacturers’ Video Equipment

This remote control supplied with the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, DBS tuners, VCRs and DVD players.

When operating the other manufacturers’ components, refer also to the manuals supplied with them.

•After replacing batteries for the remote control, you need to set the manufactures’ codes again.

To change the transmittable signals for operating another manufacturer’s TV

1.Press and hold TV .

2.Press TV/DBS.

3.Enter a manufacturer’s code using buttons 1 – 9,

and 0.

See the list on the right column to find the code.

4. Release TV .

The following buttons can be used for operating a TV:

TV : Turn on and off the TV.

TV VOL +/–:Adjust the volume.

TV/VIDEO: Set the input mode (either TV or VIDEO).

After pressing TV/DBS, you can perform the following operations on a TV:

CH +/–:Change the channels.

1 – 10/0, 0, 100+ (+10):

Select the channels.

The 10/0 button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.

Notes:

•All the functions listed above may not be assigned to the buttons for some TVs.

•If you cannot change the channels of some TVs by pressing 10 keys, press CH +/– for changing the channels.

For TV

Manufacturer	Codes	Manufacturer	Codes
JVC	00*, 02, 13,	Quelle	52, 53, 54, 55,
	14, 47, 74		56, 57, 58, 59,
Akai	01, 02		60, 61, 62, 63,
Blaupunkt	03, 04		64, 65, 66, 67
Fisher	01, 05	RCA/	08, 24, 29, 30,
Grundig	03, 06, 07	Proscan	31, 48
Hitachi	08, 09, 10, 49	SABA	32, 33, 68, 69,
Irradio	02		70
ITT/NOKIA	11, 12	Samsung	06, 08, 16, 34,
Loewe	06, 15, 16		35, 49
Magnavox	08, 17, 49	Sanyo	01, 05
Mets	50, 51, 52, 53	Schneider	02, 15, 36
Mitsubishi	08, 18, 19, 20	Sharp	37, 38, 77
Mivar	21	Sony	39
Nordmende	22, 23	Telefunken	40, 41, 42, 69
Okano	15	Thomson	71, 72
Panasonic	24, 25, 26, 27	Toshiba	37, 43, 44
	76	Zenith	45, 46
Philips	15, 17, 28, 75

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

5. Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

45

Image 48

Contents RX-7032VSL Precaución -- Interruptor STANDBY/ON Precaução -- Interruptor STANDBY/ONPrecaución Ventilación Adecuada Features PrecautionsIntroduction Table of Contents Remote Control Parts IdentificationButtons 15, 44 Front Panel Display WindowInside the front door How to open the front door Press down on PUSH-OPENRear Panel OutputBefore Installation Checking the Supplied AccessoriesAdjusting the Voltage Selector Putting Batteries in the Remote ControlConnecting the FM and AM Antennas AM Antenna ConnectionsFM Antenna Connections Outdoor FM Antenna CableConnecting the Speakers Insert the speaker signal cableBasic connecting procedure Close the speaker terminalConnecting the subwoofer speaker Placing speakersFront speakers and center speaker Surround and surround back speakersConnecting Audio/Video Components Analog ConnectionsCassette deck CD playerVideo component connections If your video components have an AV Compulink jackTV and/or DBS tuner To listen to the sound after connection, press VCRDVD player DVD playerTo listen to the sound after connection, press DVD Multi Connecting the Power Cord Plug the power cord into an AC outletDigital Connections Digital output terminalDaily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations Adjusting the Volume Speaker and signal indicators on the displayWhen analog input is selected Always lights up Selecting different sources for picture and soundSelecting the Analog or Digital Input Mode Listening with headphones onlySubwoofer Sound To use the speakers connected to the Front SpeakersSetting the Dynamic Range To select the analog input mode againTurning Analog Direct On and Off Using the Sleep Timer Reinforcing the BassMuting the Sound Changing the Display BrightnessTuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode While listening to an FM station, press FM ModePress the 10 keys to select a preset channel number To tune in a preset stationBasic Settings Setting the Speakers Configuration RemotePress Quick Speaker Setup Press in Multi JOG Push SETBasic Setting Items Speakers channels number and sizeRoom size and speaker distance Items To do SeeBasic Procedure Press SettingSetting the Speakers Push in Multi JOG Push SETSetting the Speaker Distance Surround back speakers quantity-SBACK OUT2SPK Select this to use 2 surround back speakers Measuring unit-DIST UnitSetting the Bass Sounds Selecting main or sub channel-DUAL MonoSelect one of the following Select the playback sounds channelSetting the Digital Input Terminals Setting the Component Video InputMemorizing the Volume Level for Each Source To recall the volume levelAdjusting Sound Basic Setting Items Basic ProcedurePress Adjust Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencySelect a speaker you want to adjust Adjustable parametersFor DAP modes For Pro Logic II Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesWhat is Dual Mono? DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24Incoming Signal Type EX/ES Setting Available Surround ModeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhonePress Surround to activate the Surround mode Activating the Surround ModesSelect and play any source other than DVD Multi Using the DSP Modes 3D Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes ALL Channel Stereo modeMulti-channel digital signals Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeConnection diagram Press DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection Video cord To Video InputAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD changer 7/PCD recorder Cassette deckOperating Video Components DVD playerCH + If there are more than one code listed for your brand of TV Release TVTry to operate your TV by pressing TV For TV Manufacturer CodesRelease CATV/DBS For DBS tunerFor Catv converter Manufacturer CodesIf there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR For VCRRelease Audio For DVD playerDenon Panasonic Philips Pioneer 04, 05 Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionSpecifications AudioVideo Precaución para la línea de la red CA Precaução para a ligação à tensão da rede CA