English
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
Setting the AM Tuner Interval Spacing | Remote | Notes: |
NOT |
• When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator also lights up.
• When you hold and then release the button in step 2, the frequency keeps changing until a station is tuned in.
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. Select the appropriate interval spacing setting to receive the AM broadcasting in your area.
•9 kHz interval spacing is the initial setting.
On the front panel ONLY:
1Turn off the unit.
• Be sure that the unit is plugged into a wall outlet.
2Change the interval spacing.
To set the AM tuner to the 10 kHz spacing:
Hold down FM/AM TUNING 5 and press 
STANDBY/ON. “10k STEP” appears on the display for a while.
To set the AM tuner to the 9 kHz spacing:
Hold down FM/AM TUNING ∞ and press 
STANDBY/ON. “9k STEP” appears on the display for a while.
The unit is turned on with the interval spacing changed.
Tuning in to Stations Manually
1. Press FM or AM to select the band.
The last received station of the selected band is tuned in.
| ANALOG | TUNED STEREO |
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
2.Press FM/AM TUNING 5 or ∞ repeatedly until you find the frequency you want.
•Pressing FM/AM TUNING 5 increases the frequency.
•Pressing FM/AM TUNING ∞ decreases the frequency.
| ANALOG | TUNED STEREO |
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
From the remote control:
1.Press FM/AM.
•Each time you press the button, the band alternates between FM and AM.
2.Press TUNING UP or TUNING DOWN repeatedly until you find the frequency you want.
•Pressing TUNING UP increases the frequency.
•Pressing TUNING DOWN decreases the frequency.
Using Preset Tuning | Remote |
NOT | |
|
Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
On the front panel ONLY:
1.Tune in the station you want to preset (see “Tuning in to Stations Manually” on the left).
•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 22.
2.Press MEMORY.
| ANALOG | TUNED STEREO |
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
The channel number position starts flashing on the display for about 10 seconds.
21