English
Adjusting Sound
You can make sound adjustment to your preference after completing basic setting.
Basic Setting Items | Basic Procedure |
On the following pages, you can adjust the items listed below:
•You can adjust only the items applicable to the current sound mode.
•If Analog Direct is in use, you cannot make any sound adjustments.
| Items | To do | See page | |
DIGITAL EQ | Adjust equalizer pattern. | 30 | ||
|
|
|
| |
SUBWFR LVL | Adjust the subwoofer output level. | 30 | ||
|
|
|
| |
FRONT L LVL | Adjust the left front speaker output |
| ||
|
|
| level. | 30 |
|
|
|
| |
FRONT R LVL | Adjust the right front speaker output |
| ||
|
|
| level. | 30 |
|
|
|
| |
CENTER LVL | Adjust the center speaker output |
| ||
|
|
| level. | 30 |
|
|
|
| |
SURR L LVL | Adjust the left surround speaker |
| ||
|
|
| output level. | 30 |
|
|
|
| |
SURR R LVL | Adjust the right surround speaker |
| ||
|
|
| output level. | 30 |
|
|
|
| |
SBACK LVL | Adjust the surround back speaker |
| ||
|
|
| output level. | 30 |
|
|
|
| |
EFFECT*1 | Adjust the DAP effect level. | 31 | ||
ROOMSIZE*1 | Select the room size for your virtual |
| ||
|
|
| listening room. | 31 |
|
|
|
| |
LIVENESS*1 | Select the liveness level for your |
| ||
|
|
| virtual listening room. | 31 |
|
|
|
| |
CTR TONE | Make the center tone soft or sharp. | 31 | ||
|
|
| ||
PANORAMA*2 | Add “wraparound” sound effect with | |||
|
|
| 31 | |
|
|
| ||
CNTR WIDTH*2 | Adjust the center channel localization | |||
|
|
| between the center speaker and the |
|
|
|
| left/right front speakers. | 31 |
|
|
|
| |
DIMENSION*2 | Adjust sound localization position. | 31 | ||
CNTR GAIN*3 | Adjust sound localization of the |
| ||
|
|
| center channel. | 31 |
|
|
|
| |
Notes: |
|
|
| |
*1 | Adjustable when the DAP mode is in use. |
| ||
*2 | Adjustable when Pro Logic II Music is in use. |
| ||
*3 | Adjustable when Neo:6 Music is in use. |
| ||
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Ex. When adjusting the subwoofer level to “–3.”
1. Press ADJUST.
The last selected item appears on the display.
| ANALOG |
|
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
2.Turn MULTI JOG until an item you want appears on the display.
•In this example, select “SUBWFR LVL.” For available items, see the list to the left.
| ANALOG |
|
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
3. Press in MULTI JOG (PUSH SET).
The current setting (or level) for the selected item appears on the display.
| ANALOG |
|
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
4.Turn MULTI JOG to select a setting you want or to make an adjustment as you like.
| ANALOG |
|
L | R | LINEAR PCM |
SUBWFR | SPEAKERS 1 | |
VOLUME
5.Press EXIT.
6.Repeat steps 2 to 5 to set other items if necessary.
7.Press EXIT.
The source indication resumes on the display.
29