JVC 0303NHMMDWJEIN, RM-SRX7032U Setting the Bass Sounds, Selecting main or sub channel-DUAL Mono

Page 30

English

Setting the Bass Sounds

You can adjust subwoofer and bass sounds precisely according to your preference.

7Subwoofer output—S WFR OUTPUT

You can select the type of the signal which can be transmitted through the subwoofer. In other words, you can determine whether or not the bass elements of the front speaker channels are transmitted through the subwoofer regardless of the front speaker size setting (either “SMALL” or “LARGE”).

Select one of the following:

LFE: Select to transmit only the LFE signals (while playing Dolby Digital and DTS software) and the bass elements of small speakers through the subwoofer.

LFE+MAIN: Select to always add the bass elements of the front speaker channels (MAIN) to the above (LFE) setting, and to transmit them through the subwoofer.

Note:

If you have selected “NO” for the subwoofer, this function is not available.

7Crossover frequency—CROSS OVER

When you use a subwoofer, you can select the cutoff frequency for the small speakers used.

Select one of the crossover frequency levels according to the size of the small speaker connected.

80Hz: Select when the cone speaker unit built in the speaker is about 12 cm.

100Hz: Select when the cone speaker unit built in the speaker is about 10 cm.

120Hz: Select when the cone speaker unit built in the speaker is about 8 cm.

150Hz: Select when the cone speaker unit built in the speaker is about 6 cm.

Notes:

.• If you have selected “LARGE” for all activated speakers (see page 25), this function is fixed to “OFF.”

Crossover frequency is not valid for the DVD MULTI playback, All Channel Stereo, HEADPHONE, and 3D HEADPHONE mode.

7Low frequency effect attenuator—LFE ATTENUATE

If the bass sound is distorted while playing back software encoded with Dolby Digital or DTS, set the LFE level to eliminate distortion.

Select one of the following:

0dB: Normally select this.

10dB: Select when the bass sound is distorted.

Selecting main or sub channel—DUAL MONO

When the playback source is Dual Mono, you can select which, or both channels to listen to.

Select the playback sounds (channel).

MAIN: Select to play back the main channel (Ch1).*1 Signal indicator “L” lights up while playing back this channel.

SUB: Select to play back the sub-channel (Ch2).*1 Signal indicator “R” lights up while playing back this channel.

ALL: Select to play back both the main and sub-channels (Ch1/Ch2).*1

Signal indicators “L” and “R” light up while playing back these channels.

Notes:

The Dual Mono format is not identical with bilingual broadcasting for TV programs. So this setting does not take effect while watching such bilingual programs.

*1 Dual Mono signals can be heard from the following speakers— L (left front speaker), R (right front speaker), and C (center speaker)—with respect to the current Surround setting.

 

 

 

 

 

 

 

 

 

 

With Surround Activated

 

 

 

 

 

 

 

 

Dual Mono

Without Surround

 

 

 

 

 

 

 

Center speaker setting

 

 

 

 

 

 

 

 

Setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMALL/LARGE

 

 

 

 

 

 

 

 

 

 

NONE

 

L

R

L

 

 

 

 

C

 

R

 

 

 

 

 

L

 

 

R

MAIN

Ch 1

Ch 1

 

 

 

Ch 1

 

 

 

 

 

Ch 1

 

 

Ch1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUB

Ch 2

Ch 2

 

 

 

Ch 2

 

 

 

 

 

Ch 2

 

Ch 2

 

 

 

 

 

 

 

 

 

 

 

 

ALL

Ch 1

Ch 2

 

Ch 1+Ch 2

 

 

 

Ch 1+Ch 2

Ch 1+Ch 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

Image 30
Contents RX-7032VSL Precaución -- Interruptor STANDBY/ON Precaução -- Interruptor STANDBY/ONPrecaución Ventilación Adecuada Features PrecautionsIntroduction Table of Contents Remote Control Parts IdentificationButtons 15, 44 Front Panel Display WindowInside the front door How to open the front door Press down on PUSH-OPENRear Panel OutputAdjusting the Voltage Selector Before InstallationChecking the Supplied Accessories Putting Batteries in the Remote ControlFM Antenna Connections Connecting the FM and AM AntennasAM Antenna Connections Outdoor FM Antenna CableBasic connecting procedure Connecting the SpeakersInsert the speaker signal cable Close the speaker terminalFront speakers and center speaker Connecting the subwoofer speakerPlacing speakers Surround and surround back speakersCassette deck Connecting Audio/Video ComponentsAnalog Connections CD playerTV and/or DBS tuner Video component connectionsIf your video components have an AV Compulink jack To listen to the sound after connection, press VCRDVD player DVD playerTo listen to the sound after connection, press DVD Multi Digital Connections Connecting the Power CordPlug the power cord into an AC outlet Digital output terminalDaily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations When analog input is selected Always lights up Adjusting the VolumeSpeaker and signal indicators on the display Selecting different sources for picture and soundSubwoofer Sound Selecting the Analog or Digital Input ModeListening with headphones only To use the speakers connected to the Front SpeakersSetting the Dynamic Range To select the analog input mode againTurning Analog Direct On and Off Muting the Sound Using the Sleep TimerReinforcing the Bass Changing the Display BrightnessTuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Press the 10 keys to select a preset channel number Selecting the FM Reception ModeWhile listening to an FM station, press FM Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsSetting the Speakers Configuration Remote Press in Multi JOG Push SETRoom size and speaker distance Basic Setting ItemsSpeakers channels number and size Items To do SeeSetting the Speakers Basic ProcedurePress Setting Push in Multi JOG Push SET2SPK Select this to use 2 surround back speakers Setting the Speaker DistanceSurround back speakers quantity-SBACK OUT Measuring unit-DIST UnitSelect one of the following Setting the Bass SoundsSelecting main or sub channel-DUAL Mono Select the playback sounds channelMemorizing the Volume Level for Each Source Setting the Digital Input TerminalsSetting the Component Video Input To recall the volume levelPress Adjust Adjusting SoundBasic Setting Items Basic Procedure Ex. When adjusting the subwoofer level toEqualization adjustment-DIGITAL EQ Adjusting the Equalization PatternsAdjusting the Speaker Output Levels Repeat steps 2 and 3 to adjust the other center frequencyFor DAP modes Select a speaker you want to adjustAdjustable parameters For Pro Logic II Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesDTS Extended Surround DTS-ES What is Dual Mono?DTS Digital Surround DTS 96/24Surround Modes Applicable to the Various Software Incoming Signal TypeEX/ES Setting Available Surround Mode 3D Headphone Mode-3D H PhonePress Surround to activate the Surround mode Activating the Surround ModesSelect and play any source other than DVD Multi Reproducing the Sound Field Using the DSP Modes3D Headphone Mode Introducing the DSP ModesMulti-channel digital signals To cancel the DSP modesALL Channel Stereo mode Activating the DSP ModesConnection diagram Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Press DVD Multi so that DVD Multi appears on the displayPress the play 3 button on the CD player Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Video cord To Video InputOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierCD recorder CD changer7/P Cassette deckOperating Video Components DVD playerCH + Try to operate your TV by pressing TV If there are more than one code listed for your brand of TVRelease TV For TV Manufacturer CodesFor Catv converter Release CATV/DBSFor DBS tuner Manufacturer CodesTry to operate your VCR by pressing VCR If there are more than one code listed for your brandRelease VCR For VCRDenon Panasonic Philips Pioneer 04, 05 Release AudioFor DVD player Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionSpecifications AudioVideo Precaución para la línea de la red CA Precaução para a ligação à tensão da rede CA