JVC LVT1007-005A manual Release CATV/DBS, For DBS tuner, For Catv converter, Manufacturer Codes

Page 49

To change the transmittable signals for operating a CATV converter or DBS tuner

1.Press and hold CATV/DBS .

2.Press CATV/DBS CONTROL.

3 Enter a manufacturer’s code using buttons 1 – 9, and 0.

See the list on the right column to find the code.

4. Release CATV/DBS .

The following buttons can be used for operating a CATV converter and DBS tuner:

CATV/DBS : Turn on and off a CATV converter or DBS tuner.

After pressing CATV/DBS CONTROL, you can perform the following operations on a CATV converter or DBS tuner:

CH +/–:Change the channels.

1 – 10/0, 0, 100+ (+10):

Select the channels.

The 10/0 button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

5. Try to operate your CATV converter or DBS tuner by pressing CATV/DBS .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner, try each one until the correct one is entered.

Note:

You cannot preset the signals for both the CATV converter and DBS

tuner at the same time.

		For DBS tuner

	Manufacturer			Codes
	JVC		56*, 57, 67
	Amstrad		43, 44, 45, 46, 47, 48, 49
	Blaupunkt		30
	Echostar		50, 51, 67
	Goldstar		31
	Grundig		32, 33
	Hirshmann		48, 52, 53, 54, 55
	Instrument		68
	ITT/NOKIA		34
	Kathrein		52, 58, 59, 60, 61, 62, 63
	NEC		35, 36
	Orbitech		48
	Philips		37, 38
	RCA		65
	Samsung		39, 40
	Schwaiger		61, 64
	Siemens		41, 42
	Sony		66
	Technisat		48

				*Initial setting
	For CATV converter

	Manufacturer			Codes

	General Instrument			06, 07, 08, 09, 10, 11,
				12, 13, 14, 29
	Hamlin/Regal			01, 02, 03, 04, 05
	Jerrold			06, 07, 08, 09, 10, 11,
				12, 13, 14
	Oak			15, 16, 17
	Panasonic			18, 19, 20
	Pioneer			21, 22
	Scientific Atlanta			23, 24, 25
	Tocom			26
	Zenith			27, 28

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

English

46

Image 49

Contents RX-7032VSL Precaução -- Interruptor STANDBY/ON Precaución -- Interruptor STANDBY/ONPrecaución Ventilación Adecuada Precautions FeaturesIntroduction Table of Contents Parts Identification Remote ControlButtons 15, 44 Display Window Front PanelInside the front door Press down on PUSH-OPEN How to open the front doorOutput Rear PanelChecking the Supplied Accessories Before InstallationAdjusting the Voltage Selector Putting Batteries in the Remote ControlAM Antenna Connections Connecting the FM and AM AntennasFM Antenna Connections Outdoor FM Antenna CableInsert the speaker signal cable Connecting the SpeakersBasic connecting procedure Close the speaker terminalPlacing speakers Connecting the subwoofer speakerFront speakers and center speaker Surround and surround back speakersAnalog Connections Connecting Audio/Video ComponentsCassette deck CD playerIf your video components have an AV Compulink jack Video component connectionsTV and/or DBS tuner To listen to the sound after connection, press VCRDVD player DVD playerTo listen to the sound after connection, press DVD Multi Plug the power cord into an AC outlet Connecting the Power CordDigital Connections Digital output terminalTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Speaker and signal indicators on the display Adjusting the VolumeWhen analog input is selected Always lights up Selecting different sources for picture and soundListening with headphones only Selecting the Analog or Digital Input ModeSubwoofer Sound To use the speakers connected to the Front SpeakersTo select the analog input mode again Setting the Dynamic RangeTurning Analog Direct On and Off Reinforcing the Bass Using the Sleep TimerMuting the Sound Changing the Display BrightnessUsing Preset Tuning Tuning in to Stations ManuallyReceiving Radio Broadcasts While listening to an FM station, press FM Mode Selecting the FM Reception ModePress the 10 keys to select a preset channel number To tune in a preset stationSetting the Speakers Configuration Remote Basic SettingsPress Quick Speaker Setup Press in Multi JOG Push SETSpeakers channels number and size Basic Setting ItemsRoom size and speaker distance Items To do SeePress Setting Basic ProcedureSetting the Speakers Push in Multi JOG Push SETSurround back speakers quantity-SBACK OUT Setting the Speaker Distance2SPK Select this to use 2 surround back speakers Measuring unit-DIST UnitSelecting main or sub channel-DUAL Mono Setting the Bass SoundsSelect one of the following Select the playback sounds channelSetting the Component Video Input Setting the Digital Input TerminalsMemorizing the Volume Level for Each Source To recall the volume levelBasic Setting Items Basic Procedure Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting the Equalization PatternsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencyAdjustable parameters Select a speaker you want to adjustFor DAP modes For Pro Logic II Music onlyReproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDTS Digital Surround What is Dual Mono?DTS Extended Surround DTS-ES DTS 96/24EX/ES Setting Available Surround Mode Incoming Signal TypeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhoneActivating the Surround Modes Press Surround to activate the Surround modeSelect and play any source other than DVD Multi 3D Headphone Mode Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesALL Channel Stereo mode To cancel the DSP modesMulti-channel digital signals Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeConnection diagram Press DVD Multi so that DVD Multi appears on the displayRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connection Video cord To Video InputAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section Amplifier7/P CD changerCD recorder Cassette deckDVD player Operating Video ComponentsCH + Release TV If there are more than one code listed for your brand of TVTry to operate your TV by pressing TV For TV Manufacturer CodesFor DBS tuner Release CATV/DBSFor Catv converter Manufacturer CodesRelease VCR If there are more than one code listed for your brandTry to operate your VCR by pressing VCR For VCRFor DVD player Release AudioDenon Panasonic Philips Pioneer 04, 05 Samsung Sony Toshiba YamahaProblem Possible Cause Solution TroubleshootingAudio SpecificationsVideo Precaução para a ligação à tensão da rede CA Precaución para la línea de la red CA