JVC RM-SRX7032U, RX-7032V Basic Procedure, Press Setting, Push in Multi JOG Push SET, Press Exit

Page 28

English

Basic Procedure

 

 

 

 

 

 

: shows the initial setting in the following

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex. When setting One Touch Operation to “ON.”

1. Press SETTING.

The last selected item appears on the display.

 

ANALOG

 

L

R

LINEAR PCM

SUBWFR

SPEAKERS 1

VOLUME

2.Turn MULTI JOG until an item you want appears on the display.

In this example, select “ONE TOUCH OPE.” For available items, see the list “Basic Setting Items” on page 24.

 

ANALOG

 

L

R

LINEAR PCM

SUBWFR

SPEAKERS 1

VOLUME

3. Push in MULTI JOG (PUSH SET).

The current setting for the selected item appears on the display.

 

ANALOG

 

L

R

LINEAR PCM

SUBWFR

SPEAKERS 1

VOLUME

4.Turn MULTI JOG until a setting you want appears on the display.

 

ANALOG

ONETOUCH OPERATION

L

R

LINEAR PCM

SUBWFR

SPEAKERS 1

VOLUME

5.Press EXIT.

6.Repeat steps 2 to 5 to set other items if necessary.

7.Press EXIT.

The source indication resumes on the display.

Setting the Speakers

To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker arrangement after all connections are completed.

If you have used Quick Speaker Setup on page 23, this setting is not required.

7Subwoofer setting—SUB WOOFER

Select whether you have connected a subwoofer or not.

YES: Select when a subwoofer is connected.

NO: Select when no subwoofer is used.

Note:

If you have selected “NO” for the subwoofer, you cannot use the SUBWOOFER OUT ON/OFF button on the front panel.

7Speaker size—FRONT SPEAKER, CNTR SPEAKER, SURR SPEAKER, SBACK SPEAKER

Select the size for each connected speaker.

LARGE*1: Select when the speaker size is relatively large.

SMALL*2: Select when the speaker size is relatively small.

NONE: Select this when you have not connected a speaker. (Not selectable for the front speakers)

*1 Initial setting for front speakers.

*2 Initial setting for center, surround, and surround back speakers.

Notes:

Keep the following comments in mind as reference when adjusting.

If the size of the cone speaker unit built in your speaker is larger than 12 cm, select “LARGE,” and if it is smaller than 12 cm, select “SMALL.”

If you have selected “NO” for the subwoofer setting, you can only select “LARGE” for the front speakers.

If you have selected “SMALL” for the front speakers, you cannot select “LARGE” for the center, surround, and surround back speakers.

If you have selected “SMALL” for the surround speakers, you cannot select “LARGE” for the surround back speakers.

If you have selected “NONE” for the surround speakers, the surround back speakers are fixed to “NONE.”

25

Image 28
Contents RX-7032VSL Precaución -- Interruptor STANDBY/ON Precaução -- Interruptor STANDBY/ONPrecaución Ventilación Adecuada Precautions FeaturesIntroduction Table of Contents Parts Identification Remote ControlButtons 15, 44 Display Window Front PanelInside the front door How to open the front door Press down on PUSH-OPENRear Panel OutputBefore Installation Checking the Supplied AccessoriesAdjusting the Voltage Selector Putting Batteries in the Remote ControlConnecting the FM and AM Antennas AM Antenna ConnectionsFM Antenna Connections Outdoor FM Antenna CableConnecting the Speakers Insert the speaker signal cableBasic connecting procedure Close the speaker terminalConnecting the subwoofer speaker Placing speakersFront speakers and center speaker Surround and surround back speakersConnecting Audio/Video Components Analog ConnectionsCassette deck CD playerVideo component connections If your video components have an AV Compulink jackTV and/or DBS tuner To listen to the sound after connection, press VCRDVD player DVD playerTo listen to the sound after connection, press DVD Multi Connecting the Power Cord Plug the power cord into an AC outletDigital Connections Digital output terminalTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Adjusting the Volume Speaker and signal indicators on the displayWhen analog input is selected Always lights up Selecting different sources for picture and soundSelecting the Analog or Digital Input Mode Listening with headphones onlySubwoofer Sound To use the speakers connected to the Front SpeakersSetting the Dynamic Range To select the analog input mode againTurning Analog Direct On and Off Using the Sleep Timer Reinforcing the BassMuting the Sound Changing the Display BrightnessUsing Preset Tuning Tuning in to Stations ManuallyReceiving Radio Broadcasts Selecting the FM Reception Mode While listening to an FM station, press FM ModePress the 10 keys to select a preset channel number To tune in a preset stationBasic Settings Setting the Speakers Configuration RemotePress Quick Speaker Setup Press in Multi JOG Push SETBasic Setting Items Speakers channels number and sizeRoom size and speaker distance Items To do SeeBasic Procedure Press SettingSetting the Speakers Push in Multi JOG Push SETSetting the Speaker Distance Surround back speakers quantity-SBACK OUT2SPK Select this to use 2 surround back speakers Measuring unit-DIST UnitSetting the Bass Sounds Selecting main or sub channel-DUAL MonoSelect one of the following Select the playback sounds channelSetting the Digital Input Terminals Setting the Component Video InputMemorizing the Volume Level for Each Source To recall the volume levelAdjusting Sound Basic Setting Items Basic ProcedurePress Adjust Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencySelect a speaker you want to adjust Adjustable parametersFor DAP modes For Pro Logic II Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesWhat is Dual Mono? DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24Incoming Signal Type EX/ES Setting Available Surround ModeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhoneActivating the Surround Modes Press Surround to activate the Surround modeSelect and play any source other than DVD Multi Using the DSP Modes 3D Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes ALL Channel Stereo modeMulti-channel digital signals Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeConnection diagram Press DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection Video cord To Video InputAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD changer 7/PCD recorder Cassette deckDVD player Operating Video ComponentsCH + If there are more than one code listed for your brand of TV Release TVTry to operate your TV by pressing TV For TV Manufacturer CodesRelease CATV/DBS For DBS tunerFor Catv converter Manufacturer CodesIf there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR For VCRRelease Audio For DVD playerDenon Panasonic Philips Pioneer 04, 05 Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionAudio SpecificationsVideo Precaución para la línea de la red CA Precaução para a ligação à tensão da rede CA