English
Connecting Audio/Video Components
When connecting individual components, refer also to the manuals supplied with them.
Analog Connections
If your audio components have digital audio output terminal, connecting them using the digital cords explained in “Digital Connections” (see page 14) will give you better sound quality.
Audio component connections
Use the cables with RCA pin plugs (not supplied).
•Connect the white plug to the audio left jack, and the red plug to the audio right jack.
If your audio components have a COMPU LINK jack
See also page 39 for detailed information about the connection and the COMPU LINK remote control system.
CAUTION:
If you connect a
Cassette deck
To listen to the sound after connection, press TAPE/CDR.
You can connect either a cassette deck or a CD recorder to the TAPE/CDR jacks. When connecting an CD recorder to the TAPE/ CDR jacks, see below.
Cassette deck
To audio input 
To audio output
R 
OUT
(REC)
L | TAPE |
| CDR |
| L |
| IN |
| (PLAY) |
R 
CD player
To listen to the sound after connection, press CD.
CD player
R 
CD
CD recorder
To listen to the sound after connection, press TAPE/CDR.
You can connect either a CD recorder or a cassette deck to the TAPE/CDR jacks. When connecting a cassette deck to the TAPE/ CDR jacks, see above.
L 
To audio output
IN
CD recorder
To audio input 
To audio output
R 
OUT
(REC)
L | TAPE |
| CDR |
| L |
| IN |
| (PLAY) |
R 
Note:
When connecting a CD recorder to the TAPE/CDR jacks, change the source name to “CDR,” which will be shown on the display when it is selected as the source. See page 19 for details.
11