JVC RX-7520VBK manual Connecting the Power Cord, Digital connections, Digital input terminals

Page 12

Digital connections

This receiver is equipped with two DIGITAL IN terminals—one digital coaxial terminal and one digital optical terminal.

You can connect any digital component to one of the digital terminals using a digital coaxial cable (not supplied).

IMPORTANT:

When connecting the DVD player or digital TV using the digital terminals, you also need to connect it to the video jack on the rear. Without connecting it to the video jack, you can view no playback picture.

After connecting the components using the DIGITAL IN terminals, set the following correctly if necessary:

Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Setting the Digital Input (DIGITAL IN) Terminals” on page 14.

Select the digital input mode correctly. For details, see “Selecting the Analog or Digital Input Mode” on page 14.

Digital input terminals

Digital TV

DVD player

DVD

Notes:

When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

DIGITAL 1 (coaxial): For DVD player

DIGITAL 2 (optical): For CD player

When you want to operate the CD player or CD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog connections” (see pages 6 and 7).

When you want to operate the DVD player using the AV COMPU LINK remote control system, connect the DVD player also as described in “Analog connections” (see page 8).

Connecting the Power Cord

Before plugging the receiver into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

English

 

 

CD player

 

 

CD recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital coaxial cable (not supplied) between digital coaxial terminals

Digital optical cable (not supplied) between digital optical terminals

Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference. We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.

CAUTIONS:

Do not touch the power cord with wet hands.

Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal with the digital coaxial cable (not supplied).

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD) terminal, using the digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

DIGITAL 1 (DVD)

DIGITAL 2 ( CD )

DIGITAL IN

9

Image 12
Contents RX-7520VBK Mises en garde, précautions et indications diverses For U.S.AFor Canada/pour le Canada For Canada/pour Le Canada RX-7520VBKTable of Contents Remote Control Parts IdentificationFront Panel Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverConnecting the FM and AM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers Speaker layout diagramConnecting the front speakers Connection diagramConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker Analog connections Audio component connectionsVideo component connections Cassette deck or CD recorderIf your audio components have a Compu Link jack VCRFor enjoying DVD Multi Playback Mode DVD playerDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital connections Digital input terminalsTurning On the Power Selecting the Source to Play Basic OperationsSTANDBY/ON AudioAdjusting the Volume From the remote controlChanging the source name On the front panelTurning Off the Power With the Sleep Timer Headphone modeBasic Operations Turning Off the Sounds Temporarily-MutingBasic adjustment auto memory Signal and speaker indicators on the displaySpeaker indicators light up when For recordingBasic Settings Selecting the Analog or Digital Input ModePress Control UP 5/DOWN ∞ to Select Dolby Digital or DTSSurround while Digital Auto still remains on the display On the front panelBasic Settings Setting the Speaker Information RemotePress Setting repeatedly until Frnt ST Setting With the current setting* appears on the displaySelect the unit Select the appropriate speaker distanceSelect the low frequency effect Attenuator levelComp Dynamic range Press Control UP 5/DOWN ∞Sound Adjustments Adjusting the Front SpeakersOutput Balance Sound Adjustments Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Tuner OperationsCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDVD Multi Playback Mode Creating Realistic Sound FieldsDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionAbout Relations between Speaker Layouts and Surround Modes Turning on or off the Surround modesSelecting the Surround modes Speaker Layouts Available Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Set the analog or digital input mode for Adjust the speaker output levels -10 to +10Source you like to hear and start playing Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround ON/OFF to activate Surround mode Press Surround Mode repeatedlyFor DAP modes only Adjust the effect level To cancel DAP modes and All Channel StereoUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Synchronized RecordingAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections Automatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlaySound Adjustment Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD changer Cassette deckCD recorder Operating JVC’s Audio/Video Components Operating Video ComponentsDVD player DVD menu operationsTo change the transmittable signals for operating a TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingTo change the transmittable signals for operating a VCR Operating Other Manufacturers’ Video EquipmentTry to operate your Catv converter by pressing Try to operate your VCR by pressingTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesPanasonic Philips Pioneer Sony Toshiba Yamaha Troubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionSpecifications FM tuner IHFAM tuner GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.