JVC RX-7520VBK Sound Adjustments, Adjusting the Subwoofer Output Level, Reinforcing the Bass

Page 23

Sound Adjustments

English

Adjusting the Tone

Remote

 

NOT

You can adjust the bass and treble sounds as you like.

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press ADJUST repeatedly until “BASS” ADJUST SETTIN or “TREBLE” (with the current setting)* appears on the display.

 

SPK 1

 

DIGITAL AUTO

L

C

R

LINEAR PCM

S.WFR LFE

 

LS

S

RS

CH-

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

BASS : To adjust the bass.

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have connected a subwoofer and set the subwoofer information correctly—“YES.”

On the front panel:

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press ADJUST repeatedly until

ADJUST SETTING

“SUBWFR” (with the current setting)*

 

 

 

 

 

 

appears on the display.

 

 

 

 

 

 

 

SPK 1

 

 

 

DIGITAL AUTO L C R

 

 

 

LINEAR PCM S.WFR LFE

 

 

 

LS S RS

 

 

 

CH-

 

 

 

 

 

 

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

TREBLE : To adjust the treble.

2 Press CONTROL UP 5/DOWN to CONTROL

DOWN UP

adjust the bass or treble sounds level (–10 to +10).

Each time you press the button, the sound level changes by ±2 steps.

2Press CONTROL UP 5/DOWN to adjust the subwoofer output level (–10 to +10).

From the remote control:

1Press SOUND.

The 10 keys are activated for sound adjustments.

2Press SUBWOOFER +/– to adjust the subwoofer output level

(–10 to +10).

Note:

CONTROL

DOWN UP

SOUND

SUBWOOFER

0 10

100

Subwoofer output level cannot be adjusted when using headphones.

Reinforcing the Bass

You can boost the bass level.

Press BASS BOOST to select the bass boost function.

BASS BOOST

 

BASSBOOST

On the front panel

From the remote control

Each time you press the button, the bass boost function turns on (“BASSBOOST ON”) and off (“BASSBOOST OFF”).

Select “BASSBOOST ON” to activate the bass boost function. The BASS BOOST indicator lights up on the display.

Select “BASSBOOST OFF” to cancel it. The indicator goes off.

Note:

This function affects the front speaker sounds only.

20

Image 23
Contents RX-7520VBK For U.S.A Mises en garde, précautions et indications diversesRX-7520VBK For Canada/pour le Canada For Canada/pour Le CanadaTable of Contents Front Panel Remote ControlParts Identification Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedFM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionConnection diagram Connecting the SpeakersSpeaker layout diagram Connecting the front speakersAnalog connections Audio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCR Video component connectionsCassette deck or CD recorder If your audio components have a Compu Link jackDVD player For enjoying DVD Multi Playback ModeDVD player Digital input terminals Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsAudio Turning On the Power Selecting the Source to PlayBasic Operations STANDBY/ONOn the front panel Adjusting the VolumeFrom the remote control Changing the source nameTurning Off the Sounds Temporarily-Muting Turning Off the Power With the Sleep TimerHeadphone mode Basic OperationsFor recording Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel Press Control UP 5/DOWN ∞ toSelect Dolby Digital or DTS Surround while Digital Auto still remains on the displaySetting the Speaker Information Remote Basic SettingsSelect the appropriate speaker distance Press Setting repeatedly until Frnt ST SettingWith the current setting* appears on the display Select the unitPress Control UP 5/DOWN ∞ Select the low frequency effectAttenuator level Comp Dynamic rangeOutput Balance Sound AdjustmentsAdjusting the Front Speakers Reinforcing the Bass Sound AdjustmentsAdjusting the Subwoofer Output Level Tuner Operations Tuning in Stations ManuallyUsing Preset Tuning Tuner Operations Selecting the FM Reception ModeTypical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundAll Channel Stereo reproduction DVD Multi Playback ModeCreating Realistic Sound Fields DAP Digital Acoustic Processor modes All Channel StereoSpeaker Layouts Available Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Selecting the Surround modesPress Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Press Test again to stop the test tone Set the analog or digital input mode forAdjust the speaker output levels -10 to +10 Source you like to hear and start playingUsing DAP Modes and All Channel Stereo To cancel DAP modes and All Channel Stereo Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly For DAP modes only Adjust the effect levelPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Synchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Press the play 3 button on the CD playerConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection One-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayTuner Sound AdjustmentOperating JVC’s Audio/Video Components Operating Audio ComponentsCD recorder CD changerCassette deck DVD menu operations Operating JVC’s Audio/Video ComponentsOperating Video Components DVD playerTry to operate your TV by pressing To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing To change the transmittable signals for operating a VCROperating Other Manufacturers’ Video Equipment Try to operate your Catv converter by pressingPanasonic Philips Pioneer Sony Toshiba Yamaha Try to operate your DVD player by pressingManufacturers’ codes for DVD player Codes Problem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalGeneral SpecificationsFM tuner IHF AM tunerEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.