JVC RX-7520VBK Set the analog or digital input mode for, Press Test again to stop the test tone

Page 30
SURROUND MODE

3

4

Press SOUND.

The 10 keys are activated for sound adjustments.

Press TEST to check if you can hear the sounds through all the speakers at the equal level.

SOUND

TEST

1

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So make adjustments while listening to the sound of the source played back.

1Set the analog or digital input mode for the

English

“TEST TONE L” starts flashing on the display and a test tone comes out of the speakers in the following order:

 

TEST TONE L

TEST TONE C

 

 

TEST TONE R

 

 

(Left front speaker)

(Center speaker)

 

 

(Right front speaker)

 

 

TEST TONE LS

 

 

 

TEST TONE RS

 

 

 

(Left rear speaker)

(Right rear speaker)

Notes:

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CNTR SP” is set to “NONE.”

•No test tone comes out of the rear speakers when “REAR SP” is set to “NONE.”

5Adjust the speaker output levels (–10 to +10).

Adjust the center speaker and rear speakers levels comparing to the sound from the front speakers.

source you like to hear and start playing.

When playing back software encoded with Dolby Digital and DTS Digital Surround, select the digital input mode (see page 14).

2 Press SURROUND ON/OFF to

SURROUND ON/OFF

activate Surround mode.

 

Each time you press the button, Surround mode turns on and off alternately.

•If you are playing back software encoded with Dolby Digital multichannel, “DOLBY DIGITAL” is selected.

•If you are playing back software encoded with DTS Digital

Surround, “DTS SURROUND” is selected.

• If you are playing back any software other than above, you can select “PL II MUSIC” or “PL II MOVIE” according to the source by pressing SURROUND MODE. ( PRO LOGIC II indicator lights up on the display.)

If you like to adjust sound, go to step 3.

•To adjust the center speaker level, press CENTER +/–.

•To adjust the left rear speaker level, press REAR•L +/–.

•To adjust the right rear speaker level, press REAR•R +/–.

6Press TEST again to stop the test tone.

CENTER

2 3

REAR L

5 6

REARR

8 9

TEST

1

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one

ADJUST SETTING

 

of the following indications (with the

 

current setting)* appears on the

 

display.

 

 

SPK 1

 

 

DIGITAL AUTO

L

C

R

PROLOGIC ΙΙ

LINEAR PCM

S.WFR LFE

 

 

LS

S

RS

 

CH-

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

CENTER : To adjust the center speaker output level (–10 to +10).

REAR L : To adjust the left rear speaker output level (–10 to +10).

REAR R : To adjust the right rear speaker output level (–10 to +10).

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to adjust the selected speaker output levels.

3)Repeat steps 1) and 2) to adjust the other speaker levels.

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents RX-7520VBK Mises en garde, précautions et indications diverses For U.S.AFor Canada/pour le Canada For Canada/pour Le Canada RX-7520VBKTable of Contents Remote Control Parts IdentificationFront Panel Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverAM antenna connection Connecting the FM and AM AntennasGetting Started FM antenna connectionConnecting the front speakers Connecting the SpeakersSpeaker layout diagram Connection diagramConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsIf your audio components have a Compu Link jack Video component connectionsCassette deck or CD recorder VCRFor enjoying DVD Multi Playback Mode DVD playerDVD player Digital connections Connecting the Power CordPlug the power cord into an AC outlet Digital input terminalsSTANDBY/ON Turning On the Power Selecting the Source to PlayBasic Operations AudioChanging the source name Adjusting the VolumeFrom the remote control On the front panelBasic Operations Turning Off the Power With the Sleep TimerHeadphone mode Turning Off the Sounds Temporarily-MutingSpeaker indicators light up when Basic adjustment auto memorySignal and speaker indicators on the display For recordingBasic Settings Selecting the Analog or Digital Input ModeSurround while Digital Auto still remains on the display Press Control UP 5/DOWN ∞ toSelect Dolby Digital or DTS On the front panelBasic Settings Setting the Speaker Information RemoteSelect the unit Press Setting repeatedly until Frnt ST SettingWith the current setting* appears on the display Select the appropriate speaker distanceComp Dynamic range Select the low frequency effectAttenuator level Press Control UP 5/DOWN ∞Sound Adjustments Adjusting the Front SpeakersOutput Balance Sound Adjustments Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Tuner OperationsDTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes All Channel Stereo DVD Multi Playback ModeCreating Realistic Sound Fields All Channel Stereo reproductionSelecting the Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Speaker Layouts Available Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Source you like to hear and start playing Set the analog or digital input mode forAdjust the speaker output levels -10 to +10 Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo For DAP modes only Adjust the effect level Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly To cancel DAP modes and All Channel StereoUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Press the play 3 button on the CD player Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayOperating Audio Components Sound AdjustmentOperating JVC’s Audio/Video Components TunerCD changer Cassette deckCD recorder DVD player Operating JVC’s Audio/Video ComponentsOperating Video Components DVD menu operationsOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Try to operate your TV by pressingTry to operate your Catv converter by pressing To change the transmittable signals for operating a VCROperating Other Manufacturers’ Video Equipment Try to operate your VCR by pressingTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesPanasonic Philips Pioneer Sony Toshiba Yamaha Troubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner SpecificationsFM tuner IHF GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.
Top Page Image Contents