JVC RX-7520VBK Operating Other Manufacturers’ Video Equipment, Try to operate your TV by pressing

Page 40

Operating Other Manufacturers’ Video Equipment

By changing the transmittable signals, you can use the remote control supplied for this unit to operate other manufacturers’ equipment.

•Refer also to the manuals supplied for the other products.

•To operate these components with the remote control, first you need to set the manufacturers’ code each for TV, CATV converter, VCR and DVD player.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

To change the transmittable signals for operating a TV

1Set TV/CATV selector to TV.

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter manufacturer’s codes using buttons 1 – 9, and 0.

5Release STANDBY/ON TV/CATV.

Now, you can perform the following operations on the TV.

STANDBY/ON

TV/CATV

 

: Turn on or off the TV.

TV/VIDEO

: Set the input mode (either TV or VIDEO).

 

 

TV VOLUME +/–

: Adjust the volume.

TV/CATV CH +/–

: Change the channels.

 

 

After pressing TV SOUND (source selecting button), you can use the following buttons on the TV:

1 – 10, +10 (100+) : Select a channel. +10 (100+) button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer also to the manual supplied with your TV.

6Try to operate your TV by pressing

STANDBY/ON TV/CATV.

When your TV turns on or off, you have entered the correct code.

Manufacturers’ codes for TV

Manufacturer

Codes

 

 

JVC

01*

Hitachi

10

Magnavox

02

Mitsubishi

03

Panasonic

04, 11

RCA

05

Samsung

12

Sanyo

13

Sharp

06

Sony

07

Toshiba

08

Zenith

09

*“01” is the initial setting.

To change the transmittable signals for operating a CATV converter

1Set TV/CATV selector to CATV.

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter manufacturer’s codes using buttons 1 – 9, and 0.

5Release STANDBY/ON TV/CATV.

Now, you can perform the following operations on the CATV converter.

STANDBY/ON TV/CATV

: Turn on or off the CATV converter.

TV/CATV CH +/– : Change the channels.

After pressing TV SOUND (source selecting button), you can use the following buttons on the CATV converter:

1 – 10, +10 (100+) : Select a channel. +10 (100+) button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer also to the manual supplied with your CATV converter.

English

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

TO BE CONTINUED TO THE NEXT PAGE

37

Page 39 Page 41
Image 40
Page 39 Page 41
Contents RX-7520VBK Mises en garde, précautions et indications diverses For U.S.AFor Canada/pour le Canada For Canada/pour Le Canada RX-7520VBKTable of Contents Parts Identification Remote ControlFront Panel Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverConnecting the FM and AM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers Speaker layout diagramConnecting the front speakers Connection diagramConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker Analog connections Audio component connectionsVideo component connections Cassette deck or CD recorderIf your audio components have a Compu Link jack VCRDVD player For enjoying DVD Multi Playback ModeDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital connections Digital input terminalsTurning On the Power Selecting the Source to Play Basic OperationsSTANDBY/ON AudioAdjusting the Volume From the remote controlChanging the source name On the front panelTurning Off the Power With the Sleep Timer Headphone modeBasic Operations Turning Off the Sounds Temporarily-MutingBasic adjustment auto memory Signal and speaker indicators on the displaySpeaker indicators light up when For recordingBasic Settings Selecting the Analog or Digital Input ModePress Control UP 5/DOWN ∞ to Select Dolby Digital or DTSSurround while Digital Auto still remains on the display On the front panelBasic Settings Setting the Speaker Information RemotePress Setting repeatedly until Frnt ST Setting With the current setting* appears on the displaySelect the unit Select the appropriate speaker distanceSelect the low frequency effect Attenuator levelComp Dynamic range Press Control UP 5/DOWN ∞Adjusting the Front Speakers Sound AdjustmentsOutput Balance Adjusting the Subwoofer Output Level Sound AdjustmentsReinforcing the Bass Using Preset Tuning Tuning in Stations ManuallyTuner Operations Selecting the FM Reception Mode Tuner OperationsCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDVD Multi Playback Mode Creating Realistic Sound FieldsDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionAbout Relations between Speaker Layouts and Surround Modes Turning on or off the Surround modesSelecting the Surround modes Speaker Layouts Available Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Set the analog or digital input mode for Adjust the speaker output levels -10 to +10Source you like to hear and start playing Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround ON/OFF to activate Surround mode Press Surround Mode repeatedlyFor DAP modes only Adjust the effect level To cancel DAP modes and All Channel StereoActivating DVD Multi Playback Mode Using DVD Multi Playback ModePress DVD Multi Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Synchronized RecordingConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connections Automatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlaySound Adjustment Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCassette deck CD changerCD recorder Operating JVC’s Audio/Video Components Operating Video ComponentsDVD player DVD menu operationsTo change the transmittable signals for operating a TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingTo change the transmittable signals for operating a VCR Operating Other Manufacturers’ Video EquipmentTry to operate your Catv converter by pressing Try to operate your VCR by pressingManufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingPanasonic Philips Pioneer Sony Toshiba Yamaha Troubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionSpecifications FM tuner IHFAM tuner GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.
Top Page Image Contents