JVC RX-7520VBK manual For Canada/pour le Canada For Canada/pour Le Canada

Page 3

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND

For Canada/pour Le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.

CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR; “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.

English

Français

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage.

Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back.

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Attention: Ventilation Correcte

Pour éviter les chocs électriques, l’incendie et tout autre dégât.

Disposer l’appareil en tenant compte des impératifs suivants

Avant:

Rien ne doit gêner le dégagement

Flancs:

Laisser 10 cm de dégagement latéral

Dessus:

Laisser 10 cm de dégagement supérieur

Arrière:

Laisser 15 cm de dégagement arrière

Dessous:

Rien ne doit obstruer par dessous; poser

l’appareil sur une surface plate.

Veiller également à ce que l’air circule le mieux possible comme illustré.

Wall or obstructions

Mur, ou obstruction

Spacing 15 cm or more

Dégagement de 15 cm ou plus

RX-7520VBK

Front

Avant

Stand height

15 cm or more Hauteur du socle: 15 cm ou plus

Floor

Plancher

G-2

Image 3
Contents RX-7520VBK For U.S.A Mises en garde, précautions et indications diversesRX-7520VBK For Canada/pour le Canada For Canada/pour Le CanadaTable of Contents Remote Control Parts IdentificationFront Panel Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedFM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionConnection diagram Connecting the SpeakersSpeaker layout diagram Connecting the front speakersAnalog connections Audio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCR Video component connectionsCassette deck or CD recorder If your audio components have a Compu Link jackFor enjoying DVD Multi Playback Mode DVD playerDVD player Digital input terminals Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsAudio Turning On the Power Selecting the Source to PlayBasic Operations STANDBY/ONOn the front panel Adjusting the VolumeFrom the remote control Changing the source nameTurning Off the Sounds Temporarily-Muting Turning Off the Power With the Sleep TimerHeadphone mode Basic OperationsFor recording Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenSelecting the Analog or Digital Input Mode Basic SettingsOn the front panel Press Control UP 5/DOWN ∞ toSelect Dolby Digital or DTS Surround while Digital Auto still remains on the displaySetting the Speaker Information Remote Basic SettingsSelect the appropriate speaker distance Press Setting repeatedly until Frnt ST SettingWith the current setting* appears on the display Select the unitPress Control UP 5/DOWN ∞ Select the low frequency effectAttenuator level Comp Dynamic rangeSound Adjustments Adjusting the Front SpeakersOutput Balance Sound Adjustments Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Tuner Operations Selecting the FM Reception ModeTypical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundAll Channel Stereo reproduction DVD Multi Playback ModeCreating Realistic Sound Fields DAP Digital Acoustic Processor modes All Channel StereoSpeaker Layouts Available Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Selecting the Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Press Test again to stop the test tone Set the analog or digital input mode forAdjust the speaker output levels -10 to +10 Source you like to hear and start playingUsing DAP Modes and All Channel Stereo To cancel DAP modes and All Channel Stereo Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly For DAP modes only Adjust the effect levelUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Synchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Press the play 3 button on the CD playerAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections One-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayTuner Sound AdjustmentOperating JVC’s Audio/Video Components Operating Audio ComponentsCD changer Cassette deckCD recorder DVD menu operations Operating JVC’s Audio/Video ComponentsOperating Video Components DVD playerTry to operate your TV by pressing To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing To change the transmittable signals for operating a VCROperating Other Manufacturers’ Video Equipment Try to operate your Catv converter by pressingTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesPanasonic Philips Pioneer Sony Toshiba Yamaha Problem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalGeneral SpecificationsFM tuner IHF AM tunerEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.