JVC RX-7520VBK manual Mises en garde, précautions et indications diverses, For U.S.A

Page 2

Warnings, Cautions and Others/

Mises en garde, précautions et indications diverses

 

 

CAUTION

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1.Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil.

2.Ne pas exposer l’appareil à la pluie ni à l’humidité.

Caution –– STANDBY/ON button!

Disconnect the mains plug to shut the power off com-

pletely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled.

Attention –– Commutateur STANDBY/ON !

Déconnecter la fiche de secteur pour couper complètement le courant. Le commutateur

STANDBY/ON ne coupe jamais complètement la ligne de secteur, quelle que soit sa position. Le courant peut être télécommandé.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment.

– G-1 –

Page 1 Page 3
Image 2
Page 1 Page 3
Contents RX-7520VBK Mises en garde, précautions et indications diverses For U.S.AFor Canada/pour le Canada For Canada/pour Le Canada RX-7520VBKTable of Contents Front Panel Remote ControlParts Identification Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverAM antenna connection Connecting the FM and AM AntennasGetting Started FM antenna connectionConnecting the front speakers Connecting the SpeakersSpeaker layout diagram Connection diagramConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsIf your audio components have a Compu Link jack Video component connectionsCassette deck or CD recorder VCRDVD player For enjoying DVD Multi Playback ModeDVD player Digital connections Connecting the Power CordPlug the power cord into an AC outlet Digital input terminalsSTANDBY/ON Turning On the Power Selecting the Source to PlayBasic Operations AudioChanging the source name Adjusting the VolumeFrom the remote control On the front panelBasic Operations Turning Off the Power With the Sleep TimerHeadphone mode Turning Off the Sounds Temporarily-MutingSpeaker indicators light up when Basic adjustment auto memorySignal and speaker indicators on the display For recordingBasic Settings Selecting the Analog or Digital Input ModeSurround while Digital Auto still remains on the display Press Control UP 5/DOWN ∞ toSelect Dolby Digital or DTS On the front panelBasic Settings Setting the Speaker Information RemoteSelect the unit Press Setting repeatedly until Frnt ST SettingWith the current setting* appears on the display Select the appropriate speaker distanceComp Dynamic range Select the low frequency effectAttenuator level Press Control UP 5/DOWN ∞Output Balance Sound AdjustmentsAdjusting the Front Speakers Reinforcing the Bass Sound AdjustmentsAdjusting the Subwoofer Output Level Tuner Operations Tuning in Stations ManuallyUsing Preset Tuning Selecting the FM Reception Mode Tuner OperationsDTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes All Channel Stereo DVD Multi Playback ModeCreating Realistic Sound Fields All Channel Stereo reproductionSelecting the Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Speaker Layouts Available Surround modesPress Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Source you like to hear and start playing Set the analog or digital input mode forAdjust the speaker output levels -10 to +10 Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo For DAP modes only Adjust the effect level Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly To cancel DAP modes and All Channel StereoPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Press the play 3 button on the CD player Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayOperating Audio Components Sound AdjustmentOperating JVC’s Audio/Video Components TunerCD recorder CD changerCassette deck DVD player Operating JVC’s Audio/Video ComponentsOperating Video Components DVD menu operationsOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Try to operate your TV by pressingTry to operate your Catv converter by pressing To change the transmittable signals for operating a VCROperating Other Manufacturers’ Video Equipment Try to operate your VCR by pressingPanasonic Philips Pioneer Sony Toshiba Yamaha Try to operate your DVD player by pressingManufacturers’ codes for DVD player Codes Troubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner SpecificationsFM tuner IHF GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.
Top Page Image Contents