JVC RX-7520VBK manual Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner

Page 37

Operating JVC’s Audio/Video Components

English

You can use the remote control to operate other JVC’s components.

Operating Audio Components

FM MODE

Sound Adjustment

You can always use the following buttons:

SURROUND ON/OFF : Turn on or off the Surround modes.

SURROUND MODE : Select the Surround modes.

After pressing SOUND, you can use the following buttons for sound adjustment:

SUBWOOFER +/–

: Adjust the subwoofer output level.

CENTER +/–

: Adjust the center speaker output level.

 

 

REAR•L +/–

: Adjust the left rear speaker output level.

REAR•R +/–

: Adjust the right rear speaker output level.

 

 

EFFECT

: Select the DAP effect level.

TEST

: Turn on or off the test tone output.

 

 

Note:

After adjusting sounds, press the corresponding source selecting button or CD–DISC to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

Tuner

You can always use the following buttons:

FM/AM

: Alternate between FM and AM.

FM MODE

: Change the FM reception mode.

 

 

After pressing FM/AM, you can use the following buttons for tuner operations:

1 – 10, +10: Select a preset channel number directly.

• For channel number 5, press 5.

• For channel number 15, press +10, then 5.

• For channel number 20, press +10, then 10.

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC’s audio components through the COMPU LINK-4 (SYNCHRO) jacks (see page 31) in addition to the connections using cables with RCA pin plugs (see pages 6 and 7).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 11.)

•Refer also to the manuals supplied with your audio components.

CD player

After pressing CD, you can use the following buttons for CD operations:

3

: Start playback.

4

: Return to the beginning of the current

 

(or previous) track.

 

 

¢

: Skip to the beginning of the next track.

7

: Stop playback.

 

 

8

: Pause playback. To release it, press 3.

1 – 10, +10

: Select a track number directly.

 

• For track number 5, press 5.

 

• For track number 15, press +10, then 5.

 

• For track number 20, press +10, then 10.

 

 

34

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RX-7520VBK For U.S.A Mises en garde, précautions et indications diversesRX-7520VBK For Canada/pour le Canada For Canada/pour Le CanadaTable of Contents Parts Identification Remote ControlFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverGetting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionSpeaker layout diagram Connecting the SpeakersConnecting the front speakers Connection diagramConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsIf your audio components have a Compu Link jack VCRDVD player For enjoying DVD Multi Playback ModeDVD player Plug the power cord into an AC outlet Connecting the Power CordDigital connections Digital input terminalsBasic Operations Turning On the Power Selecting the Source to PlaySTANDBY/ON AudioFrom the remote control Adjusting the VolumeChanging the source name On the front panelHeadphone mode Turning Off the Power With the Sleep TimerBasic Operations Turning Off the Sounds Temporarily-MutingSignal and speaker indicators on the display Basic adjustment auto memorySpeaker indicators light up when For recordingSelecting the Analog or Digital Input Mode Basic SettingsSelect Dolby Digital or DTS Press Control UP 5/DOWN ∞ toSurround while Digital Auto still remains on the display On the front panelSetting the Speaker Information Remote Basic SettingsWith the current setting* appears on the display Press Setting repeatedly until Frnt ST SettingSelect the unit Select the appropriate speaker distanceAttenuator level Select the low frequency effectComp Dynamic range Press Control UP 5/DOWN ∞Adjusting the Front Speakers Sound AdjustmentsOutput Balance Adjusting the Subwoofer Output Level Sound AdjustmentsReinforcing the Bass Using Preset Tuning Tuning in Stations ManuallyTuner Operations Tuner Operations Selecting the FM Reception ModeDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionTurning on or off the Surround modes About Relations between Speaker Layouts and Surround ModesSelecting the Surround modes Speaker Layouts Available Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Adjust the speaker output levels -10 to +10 Set the analog or digital input mode forSource you like to hear and start playing Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround Mode repeatedly Press Surround ON/OFF to activate Surround modeFor DAP modes only Adjust the effect level To cancel DAP modes and All Channel StereoActivating DVD Multi Playback Mode Using DVD Multi Playback ModePress DVD Multi Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connections Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound AdjustmentOperating Audio Components TunerCassette deck CD changerCD recorder Operating Video Components Operating JVC’s Audio/Video ComponentsDVD player DVD menu operationsIf there are more than one code listed for your brand of TV To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a VCRTry to operate your Catv converter by pressing Try to operate your VCR by pressingManufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingPanasonic Philips Pioneer Sony Toshiba Yamaha Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF SpecificationsAM tuner GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.
Top Page Image Contents