JVC RX-7520VBK Using DVD Multi Playback Mode, Activating DVD Multi Playback Mode, Press DVD Multi

Page 33

Using DVD MULTI Playback Mode

English

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

Activating DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the adjustments until you change them.

You also need to set the DVD player to the analog discrete output mode.

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

From the remote control:

1 Press DVD MULTI.

DVD MULTI

 

Note:

When you select “DVD MULTI” as the source to play, Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

•Refer also to the manual supplied with the DVD player.

If you need to make any adjustments, go to the following steps.

3 Press SOUND.

SOUND

The 10 keys are activated for adjusting the sound.

 

On the front panel:

 

 

4 Adjust the speaker output levels.

1 Press DVD MULTI.

 

 

 

DVD MULTI

 

• To adjust the center speaker level, press

 

 

 

 

 

 

Notes:

 

 

 

CENTER +/– (–10 to +10).

 

 

 

 

 

• When you select “DVD MULTI” as the source to play, the

 

 

Surround mode is canceled, and the SURROUND ON/OFF and

• To adjust the left rear speaker level, press

 

SURROUND MODE buttons do not work.

 

 

 

 

 

REAR•L +/– (–10 to +10).

 

• If you select DVD MULTI as the source while using both the

 

 

 

speakers connected to the FRONT SPEAKERS 1 and 2

 

 

terminals, the speakers connected to the FRONT SPEAKERS

• To adjust the right rear speaker level, press

 

2 terminals are deactivated.

 

 

 

• When selecting “DVD MULTI” as the source, you can only

REAR•R +/– (–10 to +10).

select either the speakers connected to the FRONT SPEAKERS 1 or 2 terminals.

CENTER

2 3

REAR L

5 6

REARR

8 9

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

•Refer also to the manual supplied with the DVD player.

If you need to make any adjustments, go to the following steps.

3Adjust the speaker output levels.

1)Press ADJUST repeatedly until one of ADJUST SETTING

the following indications appears on the display.

CENTER :To adjust the center speaker output level (–10 to +10).

REAR L : To adjust the left rear speaker output level (–10 to +10).

REAR R : To adjust the right rear speaker output level (–10 to +10).

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to adjust the selected speaker output levels.

3)Repeat steps 1) and 2) to adjust the other speaker output levels.

30

Page 32 Page 34
Image 33
Page 32 Page 34
Contents RX-7520VBK For U.S.A Mises en garde, précautions et indications diversesRX-7520VBK For Canada/pour le Canada For Canada/pour Le CanadaTable of Contents Remote Control Parts IdentificationFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverGetting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionSpeaker layout diagram Connecting the SpeakersConnecting the front speakers Connection diagramConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsIf your audio components have a Compu Link jack VCRFor enjoying DVD Multi Playback Mode DVD playerDVD player Plug the power cord into an AC outlet Connecting the Power CordDigital connections Digital input terminalsBasic Operations Turning On the Power Selecting the Source to PlaySTANDBY/ON AudioFrom the remote control Adjusting the VolumeChanging the source name On the front panelHeadphone mode Turning Off the Power With the Sleep TimerBasic Operations Turning Off the Sounds Temporarily-MutingSignal and speaker indicators on the display Basic adjustment auto memorySpeaker indicators light up when For recordingSelecting the Analog or Digital Input Mode Basic SettingsSelect Dolby Digital or DTS Press Control UP 5/DOWN ∞ toSurround while Digital Auto still remains on the display On the front panelSetting the Speaker Information Remote Basic SettingsWith the current setting* appears on the display Press Setting repeatedly until Frnt ST SettingSelect the unit Select the appropriate speaker distanceAttenuator level Select the low frequency effectComp Dynamic range Press Control UP 5/DOWN ∞Sound Adjustments Adjusting the Front SpeakersOutput Balance Sound Adjustments Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Tuner Operations Selecting the FM Reception ModeDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionTurning on or off the Surround modes About Relations between Speaker Layouts and Surround ModesSelecting the Surround modes Speaker Layouts Available Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Adjust the speaker output levels -10 to +10 Set the analog or digital input mode forSource you like to hear and start playing Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround Mode repeatedly Press Surround ON/OFF to activate Surround modeFor DAP modes only Adjust the effect level To cancel DAP modes and All Channel StereoUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound AdjustmentOperating Audio Components TunerCD changer Cassette deckCD recorder Operating Video Components Operating JVC’s Audio/Video ComponentsDVD player DVD menu operationsIf there are more than one code listed for your brand of TV To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a VCRTry to operate your Catv converter by pressing Try to operate your VCR by pressingTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesPanasonic Philips Pioneer Sony Toshiba Yamaha Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF SpecificationsAM tuner GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.
Top Page Image Contents