JVC RX-7520VBK manual Select the low frequency effect, Attenuator level, Comp Dynamic range

Page 21

English

Basic Settings

Crossover frequency

2 Press CONTROL UP 5/DOWN to

DOWN UP

 

 

 

CONTROL

Small speakers cannot reproduce the bass sounds efficiently. If you

select the low frequency effect

 

use a small speaker in any position, this receiver automatically

attenuator level.

 

reallocates the bass sound elements assigned from the small speaker

• Each time you press the button, the setting

 

to large speakers.

 

 

alternates between “0dB” and “–10dB.”

 

To use this function properly, set this crossover frequency level

 

 

 

 

 

according to the size of the small speaker connected.

 

 

 

 

0dB : Normally select this.

 

• If you have selected “LARGE” for all speakers, this function will

 

 

not take effect.

 

–10dB : Select this when the bass sound is distorted.

• Crossover frequency is not valid for the DVD MULTI playback

 

 

 

 

 

 

mode and HEADPHONE mode.

 

 

 

1 Press SETTING repeatedly until

 

 

ST

SETTING

 

 

“CROSS (Crossover)” (with the current

 

 

 

 

 

 

 

 

setting)* appears on the display.

 

 

 

 

 

 

 

SPK 1

 

 

 

DIGITAL AUTO L C R

 

 

 

LINEAR PCM S.WFR LFE

 

 

 

LS S RS

 

 

 

CH-

 

 

 

 

 

 

*“100HZ” is the initial setting. If you have already changed the setting, another frequency will be shown.

Dynamic range compression

You can compress the dynamic range (difference between maximum sound and minimum sound) of the reproduced sound. This is useful when enjoying surround sound at night.

This function takes effect only when playing back a source encoded with Dolby Digital.

1 Press SETTING repeatedly until

 

ST

SETTING

“D. COMP (Dynamic range

 

 

 

 

 

 

 

 

compression)” (with the current setting)*

 

 

appears on the display.

 

 

2Press CONTROL UP 5/DOWN to select the crossover frequency level you like to use.

Each time you press the button, the crossover frequency level changes as follows:

80HZ 100HZ 120HZ

200HZ 150HZ

CONTROL

DOWN UP

ANALOG

SPK 1

 

L

R

 

 

S

 

 

CH-

 

 

 

*“MID” is the initial setting. If you have already changed the setting, another setting will be shown.

2 Press CONTROL UP 5/DOWN

DOWN UP

 

CONTROL

to select the appropriate compression

 

level.

 

Low frequency effect attenuator

If the bass sound is distorted while playing back software using Dolby Digital or DTS Digital Surround, follow the procedure below:

Low frequency effect attenuator is not valid for DVD MULTI playback mode.

This function takes effect only when the subwoofer (LFE) signals come in (with “SUBWOOFER” set to “YES”).

1 Press SETTING repeatedly until

 

 

ST

SETTING

“LFE ATT (Low Frequency Effect

 

 

 

 

 

 

 

 

Attenuator)” (with the current setting)*

 

 

appears on the display.

 

 

 

 

 

 

 

 

 

SPK 1

 

 

 

DIGITAL AUTO

L C R

 

 

 

 

S.WFR LFE

 

 

 

DIGITAL

LS S RS

 

 

 

 

CH-

 

 

 

 

 

 

 

*“0dB” is the initial setting. If you have already changed the setting, “–10dB” will be shown.

Each time you press the button, the display changes as follows:

OFF MID

MAX

OFF : Select this when you want to enjoy surround with its full dynamic range. (No effect applied.)

MID : Select this when you want to reduce the dynamic range a little.

MAX : Select this when you want to apply the compression effect fully. (Useful at night.)

18

Image 21
Contents RX-7520VBK For U.S.A Mises en garde, précautions et indications diversesRX-7520VBK For Canada/pour le Canada For Canada/pour Le CanadaTable of Contents Remote Control Parts IdentificationFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverGetting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionSpeaker layout diagram Connecting the SpeakersConnecting the front speakers Connection diagramConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsIf your audio components have a Compu Link jack VCRFor enjoying DVD Multi Playback Mode DVD playerDVD player Plug the power cord into an AC outlet Connecting the Power CordDigital connections Digital input terminalsBasic Operations Turning On the Power Selecting the Source to PlaySTANDBY/ON AudioFrom the remote control Adjusting the VolumeChanging the source name On the front panelHeadphone mode Turning Off the Power With the Sleep TimerBasic Operations Turning Off the Sounds Temporarily-MutingSignal and speaker indicators on the display Basic adjustment auto memorySpeaker indicators light up when For recordingSelecting the Analog or Digital Input Mode Basic SettingsSelect Dolby Digital or DTS Press Control UP 5/DOWN ∞ toSurround while Digital Auto still remains on the display On the front panelSetting the Speaker Information Remote Basic SettingsWith the current setting* appears on the display Press Setting repeatedly until Frnt ST SettingSelect the unit Select the appropriate speaker distanceAttenuator level Select the low frequency effectComp Dynamic range Press Control UP 5/DOWN ∞Sound Adjustments Adjusting the Front SpeakersOutput Balance Sound Adjustments Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Tuner Operations Selecting the FM Reception ModeDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionTurning on or off the Surround modes About Relations between Speaker Layouts and Surround ModesSelecting the Surround modes Speaker Layouts Available Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Adjust the speaker output levels -10 to +10 Set the analog or digital input mode forSource you like to hear and start playing Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround Mode repeatedly Press Surround ON/OFF to activate Surround modeFor DAP modes only Adjust the effect level To cancel DAP modes and All Channel StereoUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound AdjustmentOperating Audio Components TunerCD changer Cassette deckCD recorder Operating Video Components Operating JVC’s Audio/Video ComponentsDVD player DVD menu operationsIf there are more than one code listed for your brand of TV To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a VCRTry to operate your Catv converter by pressing Try to operate your VCR by pressingTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesPanasonic Philips Pioneer Sony Toshiba Yamaha Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF SpecificationsAM tuner GeneralEN, FR 0202NHMMDWJEIN

RX-7520VBK specifications

The JVC RX-7520VBK is a well-regarded audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for both audiophiles and casual listeners. This model is designed to enhance the home theater experience, delivering high-quality sound and versatility in connectivity options.

One of the standout features of the JVC RX-7520VBK is its powerful amplification system. With a robust output of 100 watts per channel, this receiver can handle large speakers and create an immersive audio experience. It supports various surround sound formats, including Dolby Digital and DTS, allowing users to enjoy movies, music, and games in rich detail and clarity.

In terms of connectivity, the RX-7520VBK is equipped with multiple inputs and outputs, ensuring compatibility with a range of devices. It includes several HDMI ports, which support high-definition video and audio, making it suitable for connecting modern gaming consoles, Blu-ray players, and streaming devices. The receiver also features component video inputs and composite video connections, allowing users to incorporate older devices seamlessly.

The JVC RX-7520VBK is designed to support various audio formats, including MP3 and WMA, ensuring versatility in playback options. For users looking to enhance their music experience, the receiver features a built-in equalizer with multiple presets, enabling fine-tuning of audio settings to match individual preferences and room acoustics.

Furthermore, this model offers advanced technologies such as Virtual Surround for enhancing audio spatialization in two-channel audio sources. This feature is particularly useful for creating a more cinematic experience when watching movies or enjoying music in stereo.

User-friendliness is a key aspect of the RX-7520VBK. The front panel features a clear display and buttons that are easy to navigate, while the included remote control offers convenient access to various settings and functions without needing to get up from the couch.

In summary, the JVC RX-7520VBK is a versatile and powerful receiver, ideal for those looking to create a comprehensive home theater system. With its strong amplification, extensive connectivity options, support for multiple audio formats, and user-friendly design, it stands as a solid choice in the realm of audio receivers. Whether for casual listening or a full cinematic experience, the RX-7520VBK promises to elevate any sound setup.