Digital Input (DIGITAL IN) Terminal Setting
When you use the digital input terminals, you have to register what components are connected to which terminals (DIGITAL IN 1/2).
Before you start, remember...
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
1. Press SETTING repeatedly until | T SETTING | |
| ||
“DIGITAL IN” appears on the |
|
|
|
| |
|
| |
display. |
|
|
The display changes to show the current setting. |
|
|
DIGITAL 2 terminal setting | ||
Selecting the Analog or Digital Input Mode
When you have connected digital source components using both the analog connection (see page 5) and the digital connection methods (see page 7), you need to select the input mode correctly.
On the front panel :
1. Press one of the
source selecting | DVD | VTR | TV SOUND |
|
|
| |
buttons (DVD, TV | CD | TAPE/CDR | FM/AM |
|
|
|
SOUND, CD, or TAPE/CDR)* for
which you want to change the input mode.
Note:
*Among the sources listed above, you can select the digital input only for the sources which you have selected the digital input terminals for. (See “Digital Input (DIGITAL IN) Terminal Setting.”)
DIGITAL 1 terminal setting
2. Press CONTROL UP 5/DOWN ° | CONTROL |
DOWN UP | |
to select the appropriate digital |
|
terminal setting. |
|
•Each time you press the button, the display changes to show the following:
1 DVD 2 CD Ò 1 DVD 2 TV Ò 1 DVD 2 CDR Ò
1 CD 2 DVD | Ò 1 CD 2 TV | Ò 1 CD 2 CDR | Ò |
1 TV 2 DVD | Ò 1 TV 2 CD | Ò 1 TV 2 CDR | Ò |
1 CDR 2 DVD Ò 1 CDR 2 CD Ò 1 CDR 2 TV | Ò | ||
(back to the beginning) |
|
| |
Note:
When shipped from the factory, the DIGITAL IN terminals can be used as the digital input for the following components.
•DIGITAL 1 (coaxial): For DVD player
•DIGITAL 2 (optical): For CD player
2. Press INPUT DIGITAL to select | INPUT DIGITAL |
| |
the digital input mode (AUTO). |
|
The DIGITAL AUTO indicator lights up on the display, and the digital signal indicator for the detected signals also light up.*
•When “AUTO” is selected, the receiver automatically detects the incoming signal format.
DIGITAL AUTO SPK
L R
“AUTO” appears for about 4 seconds.
*The followings are the analog/digital signal indicators on the display to indicate what type of the signal comes into the receiver.
DIGITAL AUTO :
ANALOG :
LINEAR PCM :
DIGITAL:
:
Lights up when “AUTO” is selected as the digital input mode.
Lights up when the analog input is selected.
Lights up when Linear PCM signals come in.
Lights up when Dolby Digital signals come in.
Lights up when DTS Digital Surround signals come in.
Continued to the next page.
14