To tune in a preset station
On the front panel:
1. Press FM/AM to select the band
FM/AM
(FM or AM — MW/LW).
The last received station of the selected band is tuned in.
| SPK |
|
|
|
ANALOG | L | R | TUNED | VOLUME |
2. Press FM/AM PRESET 5/ ° | FM/AM PRESET |
| |
until you find the channel you |
|
want. |
|
• Pressing FM/AM PRESET 5increases the channel numbers.
•Pressing FM/AM PRESET °decreases the channel numbers.
From the remote control:
1. Press FM/AM. | FM/AM |
|
•Each time you press the button, the band alternates between FM and AM (MW/LW).
SPK
ANALOG | L | R | TUNED | VOLUME |
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy
You can change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station.
On the front panel ONLY:
Press FM MODE. | FM MODE |
|
• Each time you press the button, the FM reception
mode alternates between “AUTO” and “MONO.”
| SPK |
|
|
ANALOG | L | R | AUTOMUTING TUNED STEREO |
SPK
ANALOG | L | R | TUNED |
AUTO:When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO
2.Press 10 keys to select a preset channel number.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 20, press +10 then 10.
•For channel number 30, press +10, +10, then 10.
TEST | – SUBWOOFER + | |
1 | 2 | 3 |
| 5 |
|
EFFECT | – CENTER + | |
4 | 5 | 6 |
5 |
| 5 |
– VCR CH + | – REAR•L + | |
7/P | 8 | 9 |
| 5 | MENU |
| – REAR•R + | |
| 10 | +10 |
ENTER
MUTING indicator lights up on the display.
MONO:Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display.
Note:
When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 29.)
17