Weider WBTL13608.0 user manual

Page 4

21. Inspect and properly tighten all parts of the	scribed in this manual. Never remove the
treadmill every three months.	motor hood unless instructed to do so by an
22. Never drop or insert any object into any open-	authorized service representative. Servicing
22. Never drop or insert any object into any open-	other than the procedures in this manual
ing.	should be performed by an authorized service
23. DANGER: Always unplug the power	representative only.
cord immediately after use, before cleaning	24. The treadmill is intended for in-home use
the treadmill, and before performing the main-	only. Do not use the treadmill in any
tenance and adjustment procedures de-	commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the treadmill. If a decal is missing, or if it is not legible, call the telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. Note: The decals are not shown at actual size.

4

Image 4

Contents QUESTIONS? Model No. WBTL13608.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Speed, accelerate, or stop unexpectedlyTrends in general Never leave the treadmill unattended while itPage Before YOU Begin FrontBack Right SideAssembly Tighten the Upright Bolts yet Lower the Uprights to the floor see the inset drawingSee the two small inset drawings. Using your fingernail Careful to avoid losing the Shock PinPage Make sure that no wires are pinched. Reattach Ceiver so the small cylinder is oriented as shownTreadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeInsert the key into the console Set a workout goal if desiredPage Measure your heart rate if desired Avoid moving your hands. WhenAdjust the program settings if desired HOW to USE a Preset ProgramPress the Start button to start the program Follow your progress with the matrix and the displays Select one of the custom programs HOW to USE a Custom Program HOW to USE a Heart Rate Program Select a heart rate programFollow your progress with the matrix and the displays Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useGap between the Magnet and the Reed Switch is Problem The walking belt slows when walked onUnplug the Power CORD. If the walking Key and Unplug the Power CORD. UsingExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page Part LIST-Model No. WBTL13608.0 Key No. Qty DescriptionQty Description DRAWING-Model No. WBTL13608.0 Exploded DRAWING-Model No Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT