27.Hook the closed loop on the end of the Long Cable
(23)onto the 3/8” Eyebolt (35) that is mounted on the Leg Lever (29).
Tighten the 5/16” Nylon Locknut (3) that is securing the other end of the Long Cable (23) to the Upright/Base.
28. Attach the Backrest (41) to the Upright (42) with two 1/4” x 2” Screws (24) and two 1/4” Flat Washers (10).
27 |
|
23 | 29 |
3 | 35 |
| |
28 |
|
41
42
24
10
24
29.Insert the 1/4” x 2 1/4” Carriage Bolt (38) into the cen- tre hole in the Seat Plate (37). Attach the Seat Plate
to the Seat (13) with two 1/4” x 3/4” Screws (43).
Insert the 1/4” x 2 1/4” Carriage Bolt (38) into the indi- cated hole in the Seat Frame (36). Tighten a 1/4”
Nylon Locknut (2) with a 1/4” Flat Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat
Frame (36) with a 1/4” Flat Washer (10) and a 1/4” x 2” Screw (24).
14
29 | 13 |
| 38 |
36 | 37 |
43
10
10
24
2