Weider user manual Part Identification Chart-WESY74091

Page 22

Part Identification Chart—WESY74091

R0101A

 

 

1/4" Nylon Locknut (2)

1/4" x 2 1/4" Carriage Bolt (38)

5/16" Nylon Locknut (3)

1/4" x 1 3/4" Screw (52)

3/8" Nylon Jamnut (22)

1/4" x 2" Screw (24)

3/8" Nylon Locknut (21)

5/16" x 1 1/2" Bolt (11)

3/8" Plain Nut (56)

5/16" x 2" Bolt (78)

1/4" Flat Washer (10)

5/16" x 2 1/4" Bolt (1)

5/16" Flat Washer (8)

5/16" x 2 1/2" Bolt (14)

5/16" x 3 1/4" Bolt (33)

3/8" Flat Washer (9)

5/16" x 6" Bolt (7)

Image 22
Contents Model No. WESY74091 Serial No Serial Number DecalTable of Contents Limited WarrantyMake sure the cables remain on the pulleys Important PrecautionsKeep hands and feet away from moving parts Using the weight system Before You BeginTo make the assembly process as smooth as possi AssemblyTo complete the process over a couple of evenings Bolts with two 5/16 Nylon Locknuts Locate and open the parts bag labeled Frame AssemblySee the inset drawing Tighten the Nylon Locknuts yetSlot Place the Top Frame 55 on top of the UprightDo not tighten Nylon Locknuts3 yet FrameLocate and open the parts bag labeled ARM Top Frame Weight Guide TubeTop Frame Make sure the welded tab on the Press FrameTion of the welded bracket a on each Arm Bolt 12 and a 3/8 Nylon Locknut Locate the parts bag labeled Cable AssemblyShort Cable 58 is between the Pulley 15 Cable Trap is oriented as shown8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/8 Spacer15b View from behind Onto the Bolt to prevent the Pulley from falling off durIng the following steps. Note Make sure the Pulley From Pulley To Pulley BracketMake sure the Cable Trap is oriented as shown Bolt 12 and a 3/8 Nylon Locknut 21. NoteSpacer To the Seat 13 with two 1/4 x 3/4 Screws Cable Diagrams Shooting and Maintenance on76, 87 1/2 Long Cable58, 126 1/4 Adjusting the Arms for Butterfly or Press Exercises AdjustmentCise will be reduced Changing the Weight Setting Attaching the Lat Bar to the Pulley StationTrouble-shooting and Maintenance Cable and re-install itStation Lever Weight Resistance ChartTop Ordering Replacement Parts Part No R0101ARemove this Part Identification Chart from the Manual WESY74091 R0101APart Identification Chart-WESY74091 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Part List-Model No. WESY7409116 x 2 1/4 Bolt Backrest Nylon Locknut Exploded Drawing-Model No. WESY74091 R0101A