Weider 740 user manual Important Precautions, Make sure the cables remain on the pulleys

Page 3

Important Precautions

WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the weight system.

1.It is the responsibility of the owner to ensure that all users of the weight system are ade- quately informed of all precautions.

2.Read all instructions in this manual and in the accompanying literature before using the weight system.

3.If you feel pain or dizziness at any time while exercising, stop immediately and begin cool- ing down.

4.Use the weight system only on a level sur- face. Cover the floor or carpet beneath the weight system for protection.

5.Inspect and tighten all parts often. Replace any worn parts immediately.

6.Make sure the cables remain on the pulleys

at all times. If the cables bind while you are exercising, stop immediately and make sure the cables are on all of the pulleys.

7.Keep children under the age of 12 and pets away from the weight system at all times.

8.Keep hands and feet away from moving parts.

9.The weight system is designed to be used by only one person at a time.

10.Always wear athletic shoes for foot protec- tion when exercising.

11.Never release the press arms/butterfly arms, leg lever or lat bar while weights are raised. The weights will fall with great force.

12.Always disconnect the lat bar from the weight system when performing an exercise that does not use the lat bar.

13.The weight system is intended for home use only. Do not use the weight system in a com- mercial, rental or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

The decal shown at the right has been attached to the weight system in the location shown. If the decal is missing or illegible, please call our customer hot line (refer to the front cover of this manual) to order a free replacement

decal. Apply the decal in the location shown.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Serial Number Decal Model No. WESY74091 Serial NoLimited Warranty Table of ContentsImportant Precautions Make sure the cables remain on the pulleysKeep hands and feet away from moving parts Before You Begin Using the weight systemAssembly To make the assembly process as smooth as possiTo complete the process over a couple of evenings Tighten the Nylon Locknuts yet Locate and open the parts bag labeled Frame AssemblySee the inset drawing Bolts with two 5/16 Nylon LocknutsFrame Place the Top Frame 55 on top of the UprightDo not tighten Nylon Locknuts3 yet SlotMake sure the welded tab on the Press Frame Top Frame Weight Guide TubeTop Frame Locate and open the parts bag labeled ARMTion of the welded bracket a on each Arm Cable Trap is oriented as shown Locate the parts bag labeled Cable AssemblyShort Cable 58 is between the Pulley 15 Bolt 12 and a 3/8 Nylon LocknutSpacer 8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/815b From Pulley To Pulley Bracket Onto the Bolt to prevent the Pulley from falling off durIng the following steps. Note Make sure the Pulley View from behindBolt 12 and a 3/8 Nylon Locknut 21. Note Make sure the Cable Trap is oriented as shownSpacer To the Seat 13 with two 1/4 x 3/4 Screws Shooting and Maintenance on Cable DiagramsLong Cable 76, 87 1/258, 126 1/4 Attaching the Lat Bar to the Pulley Station AdjustmentCise will be reduced Changing the Weight Setting Adjusting the Arms for Butterfly or Press ExercisesCable and re-install it Trouble-shooting and MaintenanceWeight Resistance Chart Station LeverTop Part No R0101A Ordering Replacement PartsWESY74091 R0101A Remove this Part Identification Chart from the ManualPart Identification Chart-WESY74091 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual Part List-Model No. WESY74091 Qty Description16 x 2 1/4 Bolt Backrest Nylon Locknut Exploded Drawing-Model No. WESY74091 R0101A
Top Page Image Contents