Weider 740 user manual

Page 23

#8 x 1” Screw (18)

1/4" x 3/4" Screw (43)

3/8" x 1" Bolt (59)

Cable Clip (53)

3/8" x 1 3/4" Bolt (68)

3/8" x 2" Bolt (12)

1/2" x 1/4" Spacer (44)

1/2" x 3/4" Spacer (45)

1/2" x 1" Spacer (51)

1/2" x 1 3/8" Spacer (61)

3/8" x 2 1/2" Bolt (60)

1" Retaining Ring (69)

3/8" x 2 3/4" Bolt (71)

3/8" x 3" Bolt (72)

3/8" x 6" Bolt (16)

Image 23

Contents Serial Number Decal Model No. WESY74091 Serial NoLimited Warranty Table of ContentsKeep hands and feet away from moving parts Important PrecautionsMake sure the cables remain on the pulleys Before You Begin Using the weight systemTo complete the process over a couple of evenings AssemblyTo make the assembly process as smooth as possi Tighten the Nylon Locknuts yet Locate and open the parts bag labeled Frame AssemblySee the inset drawing Bolts with two 5/16 Nylon LocknutsFrame Place the Top Frame 55 on top of the UprightDo not tighten Nylon Locknuts3 yet SlotMake sure the welded tab on the Press Frame Top Frame Weight Guide TubeTop Frame Locate and open the parts bag labeled ARMTion of the welded bracket a on each Arm Cable Trap is oriented as shown Locate the parts bag labeled Cable AssemblyShort Cable 58 is between the Pulley 15 Bolt 12 and a 3/8 Nylon Locknut15b Spacer8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/8 From Pulley To Pulley Bracket Onto the Bolt to prevent the Pulley from falling off durIng the following steps. Note Make sure the Pulley View from behindSpacer Bolt 12 and a 3/8 Nylon Locknut 21. NoteMake sure the Cable Trap is oriented as shown To the Seat 13 with two 1/4 x 3/4 Screws Shooting and Maintenance on Cable Diagrams58, 126 1/4 Long Cable76, 87 1/2 Attaching the Lat Bar to the Pulley Station AdjustmentCise will be reduced Changing the Weight Setting Adjusting the Arms for Butterfly or Press ExercisesCable and re-install it Trouble-shooting and MaintenanceTop Weight Resistance ChartStation Lever Part No R0101A Ordering Replacement PartsWESY74091 R0101A Remove this Part Identification Chart from the ManualPart Identification Chart-WESY74091 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual 16 x 2 1/4 Bolt Backrest Nylon Locknut Part List-Model No. WESY74091Qty Description Exploded Drawing-Model No. WESY74091 R0101A