Weider WESY5984.1 user manual Part Identification Chart

Page 20

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M10 x 42mm Button Bolt (71)

M10 Lock Washer (103)

M10 x 25mm Button Screw (87)

M8 Washer (59)

M8 x 19mm Button Screw (86)

1/4" x 16mm Bolt (82)

M10 Washer (75)

M4 x 16mm Screw (62)

M6 x 13mm Bolt (92)

M10 Nylon Locknut (76)

M4 x 12mm Flat

Head Screw (85)

M10 Nut (47)

M4 x 5mm Screw (104)

M8 Flange Nut (19) M6 Nylon Locknut (69)

M8 Nylon Locknut (65)

Image 20

Contents QUESTIONS? Model No. WESY5984.1 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Assembled Dimensions Before YOU BeginAssembly Make Things Easier for YourselfFront Leg Foot is taller than the back Page Page Page Locate the Long Cable 80. Insert one end Cable Trap and Finger Guards are oriented as ShownLocknut 76. Note The Bolt will be packaged Arm 22. Make sure the Cable is on the indiCated side of the welded rod in the Swivel ArmOnto the hook welded to the bottom of the Bench Rail Attaching the High Pulleys and LEG Lever AdjustmentsAdjusting the Seat Attaching the Accessories Adjusting the ResistanceAdjusting the Backrest Storing the Resistance SystemUsing the Removable Resistance Bars Make sure the rings are pushed against the TrayAttaching the LEG Lever Attaching the Curl PAD Cable Diagram Long CableExercise Guidelines Staying Motivated Muscle ChartCooling Down Part Identification Chart Page Part LIST-Model No. WESY5984.1 Qty DescriptionExploded DRAWING-Model No. WESY5984.1 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty