6.Attach the Lat Tower (4) to the Upright (3) with four M10 x 25mm Button Screws (87), and four M10 Lock Washers (103).
Attach the Name Plate (89) to the Lat Tower (4) with two M4 x 16mm Screws (62).
7.Attach two Eyebolts (34) to the Top Frame (10) with two M8 Washers (59) and two M8 Nylon Locknuts (65). Do not overtighten the Locknuts; the Eyebolts must be able to rotate freely.
Attach the Top Frame (10) to the Lat Tower (4) with two M10 x 65mm Button Screws (70), two M10 Washers (75), and the Top Frame Cover (93). Make sure that the Eyebolts (34) are ori- ented as shown in the inset drawing. If they are not, turn the Top Frame around and reat- tach it.
8.Attach the Leg Lever (7) to the Front Leg (6) with a Long Pin (107) and a Cotter Pin (108).
6 |
|
|
| 4 |
|
| 103 87 | |
62 |
| 87 |
89 |
| |
|
| |
62 |
|
|
| 103 |
|
| 3 |
|
7 |
|
|
70 |
|
|
65 |
|
|
75 |
|
|
59 |
|
|
93 |
|
|
| 10 | 65 |
34 |
| |
|
| |
|
| 59 |
| 34 | 4 |
|
| |
Side View |
|
|
10 |
|
|
4 |
|
|
34 |
|
|
8 |
|
|
107 | 6 |
|
7 |
|
|
|
| 108 |
7