Weider WESY5984.1 guide

12.Attach a Plastic Foot (53) to the Backrest Frame (15) with an M4 x 16mm Screw (62).

Attach the two Guard Plates (17) to the inside of the Backrest Frame (15) with four M4 x 16mm Screws (62).

13.Attach the Backrest (14) to the Backrest Frame (15) with four 1/4" x 45mm Screws (58).

14.Insert the rod on the Backrest Frame (15) into the slot in the Seat Carriage (12). Hold the Backrest

Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing.

15.Attach the two 10-pound Short Resistance Bar Caps (20) to the 10-pound Center Resistance Bar (44) with two M4 x 12mm Flat Head Screws (85).

Attach the two 10-pound Resistance Bar Caps

(101)to the 10-pound Removable Resistance Bar (67), the two 20-pound Resistance Bar Caps (88) to the 20-pound Removable Resistance Bar (36), the four 80-pound Resistance Bar Caps (100) to the two 80-pound Resistance Bars (95), and the two 40-pound Resistance Bar Caps (79) to the 40-pound Resistance Bar (96) with ten M4 x 12mm Flat Head Screws (85).

12
15
	53
	62
62
17
62
17
13
14
15
	58
14
Rod
15
	15
12	Rod
	Rod
		Slot
		12
15
	96
	95	79
		79
36	85
67
44	85	100
44	85	100
	85
	88
85
	101
85	20