Weider 831.14922.0 user manual

Page 10

,Attach the Top Frame (4) to the Upright (3) with

two M10 x 67mm Bolts (71), two M10 Washers

(57), and two M10 Locknuts (56). Do not tighten the Locknuts yet.

Attach the Top Frame (4) to the Weight Guides

(21)with two M10 x 25mm Bolts (74). Do not tighten the Bolts yet.

See steps 2 to 7. Tighten the M10 Locknuts (56) and the M8 Locknuts (58).

,Attach the Leg Bumper (60) to the Front Leg (7) with an M4 x 20mm Self-tapping Screw (69) and an M4 Washer (33). Make sure that the end of the Leg Bumper is pointing upward.

9.Apply grease to an M10 x 64mm Bolt Set (76).

Attach the Leg Lever (8) to the Front Leg (7) with the M10 x 64mm Bolt Set (76). Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg.

76 Grease

Image 10

Contents Maintenance Part List and Drawing Sears, Roebuck and Co AssemblySerial No Contents IMPORTANT Precautions Before YOU Begin Left SidePart iDENTiFiCATiON Chart Assembly Page 58% Attach the Seat Tube 6 to the Front Leg 7 in the same way Page 43¸ Page 75/% Page Page Locknut Page Page Page Page Adjustment Attaching the AccessoriesConverting the Arms Using the Curl PADConverting the Foot Plate Ibs Weight Resistance ChartWeight Butterfly Press ARM High LEG Lever LOW PulleyCable Diagram Maintenance TiGHTENiNG the CablesWorkout Guidelines Exercise FormExercise LOG StrengthPage Part LISTmlVlodel Qty DescriptionExploded Drawing AmlVlodel No .14922.0 Ro71oA Exploded Drawing BmlVlodel No .14922.0 RozloA MY-HOME DAY Full WarrantyMatter Who Made It, no Sold it Parts Repair Center