30.Thread an M12 Nut (84) all the way onto the High Cable (55).
Place a Large Washer (85) on top of the Weight Selector (24).
Tighten the High Cable (55) into the Weight
Selector (24) until all the slack is removed from the cables.
Tighten the M12 Nut (84) against the Large Washer (85).
31.Attach the Backrest (16) to the Backrest Frame
(61)with two M6 x 16mm Screws (62), an M6 x 32mm Screw (64), and an M6 Washer (82).
Insert the Backrest Frame (61)into the Upright
(3) and tighten a Long Knob (91) into the
Upright and one of the holes in the Backrest Frame.
30
84
31
32. Attach the Seat (15) to the Seat Frame (73) | 32 | |
with four M6 x 16mm Screws (62). | ||
|
Insert the Seat Frame (73) into the Seat Tube
(6)and tighten a Long Knob (91) into the Seat Tube and one of the holes in the Seat Frame.
15
Wide End
18