Weider 831.14922.0 user manual

21.Route the Low Cable (53) through the Upright

(3)and under a Thick Pulley (48).

Attach the Thick Pulley (48) inside the Upright

(3)with an M10 x 46mm Bolt (81) and an M10 Locknut (56).

22.Route the Low Cable (53) over a Thick Pulley (48).

Attach the Thick Pulley (48) and two Half Guards (43) to the Double U-bracket (63) with an M10 x 46mm Bolt (81) and an M10 Locknut (56). Make sure that the Half Guards are on the outside of the Double U-bracket as shown.

23.Route the Low Cable (53) under a Thick Pulley (48).

Attach the Thick Pulley (48) and two Half Guards (43) to the Base (1) with an M10 x

46mm Bolt (81) and an M10 Locknut (56). Make sure that the Half Guards are on the outside

of the bracket as shown.

21 _q

/

81

22

23

56 43

15