13.Apply grease to an M10 x 86mm Carriage Bolt
(67)and to two Arm Bushings (44).
Attach the Left Arm (10) to the Pivot Frame (5) with the M10 x 86mm Carriage Bolt (67), a Carriage Bolt Bushing (20), the two Arm Bushings (44), an M10 Washer (57), and an M10 Locknut (56), Do not overtighten the Locknut; the Left Arm must pivot easily.
Attach the Right Arm (9) to the Pivot Frame
(5)in the same way.
14.See the CABLE DIAGRAM on page 24 to identify the cables as you assemble them.
identify the Arm Cable (54).
Apply grease to an M8 x 22mm Shoulder Bolt
Attach the Arm Cable (54) to the left Cable Pivot (39) with the M8 x 22mm Shoulder Bolt
(65)and an M8 Locknut (58).
13
14
12