33.Insert the Pad Tube (29) into the Front Leg (7).
Slide a Small Foam Pad (28) onto each side of
the Pad Tube (29). Then, press a Pad Cap (34) into each Small Foam Pad.
Slide a Small Foam Pad (28) onto each end of
the Leg Lever (8). Then, press a Pad Cap (34) into each Small Foam Pad.
34.Attach a Shroud Support (19) and the top of the Left Shroud (17) to the left side of the Top Frame (4) with two M4.2 x 16mm
Then, attach a Shroud Clamp (90) to the top of the Left Shroud (17) and the Shroud Support
(19)with two M4 x 12mm Screws (78) and two M4 Washers (33). Do not tighten the Screws yet.
28
7
34
28
34
34
19