Electrolux 76669 manual Quantities of detergent and conditioners?, Water softening

Page 17

Operating Instructions

Detergent and Conditioners

	Which detergent and conditioners?
	Only use detergents and conditioners that are suitable for use in wash-
	ing machines. Always follow the manufacturer's instructions.
	Quantities of detergent and conditioners?
	The quantity to be used will depend on:
	• degree of soiling of the washing
	• degree of hardness of the water supply
	• load
2	If the manufacturer does not indicate the amounts to use for smaller
	loads, for half-loads use a third less than the amount recommended for

a full load, and for smaller loads and EASY IRON use half the amount recommended for a full load.

Please follow the detergent and conditioner manufacturers’ instruc- tions for use and dosing recommendations.

Water softening

For medium to high water hardness (hardness class II upwards) a water softening agent can be used. Refer to the manufacturer's instructions. Then always add the appropriate amount of detergent (underdosing) for hardness class I (soft). Your local Water Authority can advise you on the hardness of the water in your area.

Water hardness details

	Hardness class	Water hardness in °dH	Water hardness in ppm
	Hardness class	(German hardness scale)	(Parts Per Million)
		(German hardness scale)	(Parts Per Million)
	I - soft	0 - 7	to	125
	II - medium hard	7 - 14	125	- 250
	III - hard	14 - 21	250	- 375
	IV - very hard	greater than 21	greater than 375

17

Image 17

Contents ÖKO-LAVAMAT 76669 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control panelIs rinsed in, spin Main wash cycle for delicates at 30 C or 40 CWOOL/SILK P Hand-wash Additional programme buttons Run time display Programme selector Load Water Energy TemperatureConsumption data Before the first wash What does Update mean?Sorting and preparing a wash load Preparing a Wash LoadTypes of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Possible programme options to suit the type of washing Setting the Washing ProgrammeDelay timer Setting the delay timer/soaking timeChanging the spin speed/Selecting the rinse hold function Changing the spin speedLoading the washing Soak timeOpening and closing the door Add detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentIs pressed If a time delay has been setStarting a wash programme Programme progress display Washing Programme ProgressMulti-display Stopping the programmeIf Rinse Hold has been selected End of the wash cycle/removing the washingAfter the programme has ended Wash If the Easy Iron programme has been selectedWashing Programme tablesSeparate rinsing Separate conditioning/starchingSeparate spin Type of washing Max. load sizeMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorWhat to do if Trouble ShootingProblem Possible Cause Remedy Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingBefore cleaning the drain pump When the water is completely drainedDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Cancelling the additional rinse function Setting the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterCancelling the water cooling function Setting the water cooling functionWater Cooling Additional Rinse and Water CoolingCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Installation-Site preparationAre supplied with it Levelling the Appliance Installation on a Suspended FloorCheck that the appliance is level using a spirit level Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Permanent Connection Water connectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions European Guarantee Standard guarantee conditionsGreat Britain ExclusionsIndex Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG