Electrolux 76669 manual Water tap is closed Open the water tap

Page 32

Operating Instructions

Problem

Possible Cause

Remedy

 

Water tap is closed.

Open the water tap.

 

 

Close the water tap. Unscrew

No water flows.

Filter in screw connection of

the hose from the tap, re-

the inlet hose is blocked.

move the filter and clean un-

Fault code (1 appears.

 

 

der running water

 

Water tap is blocked with

Check the water tap and

 

limescale or is faulty.

have it repaired if necessary.

 

The transport packaging has

Remove transport packaging

 

according to the installation

 

not been removed.

 

and connection instructions.

 

 

 

 

Adjust the feet according to

 

The machine is not level.

the installation and connec-

 

 

tion instructions.

The washing machine

There is very little washing in

This does not impair the op-

vibrates during opera-

tion or is unstable.

the drum (e.g. only one

eration of the machine.

dressing gown).

 

 

 

The water could not be com-

Check the the drain hose and

 

remove any kink if necessary,

 

pletely pumped out before

or clean the drain pump and,

 

spinning because the drain-

 

if required, remove foreign

 

age hose is kinked or the

 

bodies from the pump hous-

 

drain pump is blocked.

 

ing.

 

 

 

 

It may be necessary to re-

Excessive foaming dur-

Probably too much detergent

duce the amount of deter-

gent used. Follow the

ing the main wash.

was used.

detergent manufacturer's

 

 

 

 

recommendations.

 

 

 

32

Image 32
Contents ÖKO-LAVAMAT 76669 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDetergent dispenser drawer Description of the ApplianceFront view Control panel Programme selectorIs rinsed in, spin Main wash cycle for delicates at 30 C or 40 CWOOL/SILK P Hand-wash Additional programme buttons Run time display Programme selector Load Water Energy TemperatureConsumption data What does Update mean? Before the first washPreparing a Wash Load Sorting and preparing a wash loadTypes of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washingSetting the delay timer/soaking time Delay timerChanging the spin speed/Selecting the rinse hold function Changing the spin speedLoading the washing Soak timeOpening and closing the door If using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentIs pressed If a time delay has been setStarting a wash programme Washing Programme Progress Programme progress displayMulti-display Stopping the programmeIf Rinse Hold has been selected End of the wash cycle/removing the washingAfter the programme has ended If the Easy Iron programme has been selected WashProgramme tables WashingSeparate conditioning/starching Separate rinsingSeparate spin Type of washing Max. load sizeMaintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorWhat to do if Trouble ShootingProblem Possible Cause Remedy Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Before cleaning the drain pumpDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Setting the additional rinse function Cancelling the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterSetting the water cooling function Cancelling the water cooling functionWater Cooling Additional Rinse and Water CoolingChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Installation-Site preparationAre supplied with it Levelling the Appliance Installation on a Suspended FloorCheck that the appliance is level using a spirit level Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Water connection Permanent ConnectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Standard guarantee conditions European GuaranteeGreat Britain ExclusionsIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG