Electrolux 76669 manual Washing Programme Progress, Programme progress display, Multi-display

Page 24

Operating Instructions

Washing Programme Progress

Programme progress display

Prior to the start, the programme steps chosen are displayed by the programme progress display. During the washing programme the current programme step is displayed.

	Multi-display
	The expected time remaining (in minutes) to


	the end of the programme is shown in the
	multi-display.
3	The multi-display indicates the estimated duration, in minutes, of the
	programme. These timings are estimates and can be varied and influ-
	enced by incoming water temperature, type and quantity of laundry,
	out of balance spin detection and foam detection. During the pro-
	gramme countdown the remaining time can be recalculated due to any
	of the above factors.

Changing the Spin Speed

During the washing programme, the spin speed can still be changed or the RINSE HOLD can be set.

Other settings cannot be changed.

Stopping the programme

0Turn the programme selector to OFF in order to stop the washing pro- gramme prematurely.

3	The washing programme can be interrupted at any time with the
	START/PAUSE button and can be continued again by pressing this but-

ton again.

24

Image 24

Contents ÖKO-LAVAMAT 76669 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C WOOL/SILK P Hand-washIs rinsed in, spin Additional programme buttons Programme selector Load Water Energy Temperature Consumption dataRun time display What does Update mean? Before the first washPreparing a Wash Load Sorting and preparing a wash loadTypes of Washing and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingSetting the delay timer/soaking time Delay timerChanging the spin speed/Selecting the rinse hold function Changing the spin speedSoak time Opening and closing the doorLoading the washing If using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentIf a time delay has been set Starting a wash programmeIs pressed Washing Programme Progress Programme progress displayMulti-display Stopping the programmeEnd of the wash cycle/removing the washing After the programme has endedIf Rinse Hold has been selected If the Easy Iron programme has been selected WashProgramme tables WashingSeparate conditioning/starching Separate rinsingSeparate spin Type of washing Max. load sizeMaintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorTrouble Shooting Problem Possible Cause RemedyWhat to do if Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Before cleaning the drain pumpDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Setting the additional rinse function Cancelling the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterSetting the water cooling function Cancelling the water cooling functionWater Cooling Additional Rinse and Water CoolingChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation-Site preparation Are supplied with itCover the hole with the cap C Installation on a Suspended Floor Check that the appliance is level using a spirit levelLevelling the Appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Water connection Permanent ConnectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Technical Data DimensionsDimensions in mm Standard guarantee conditions European GuaranteeGreat Britain ExclusionsIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG