Electrolux 76669 manual Carrying out an emergency emptying

Page 36

Operating Instructions

Carrying out an emergency emptying

If the washing machine no longer pumps out the water, emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.

1Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying.

01. Have a flat container on hand to catch the water.

2. Pull down the flap in the right corner of the base strip outwards and pull it off.

3. Remove the emergency emptying hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency emp- tying hose by turning it anticlockwise and pull it out.

The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several

times. To do this, close the emergency emptying hose temporarily with the plug.

Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose.

36

Image 36
Contents ÖKO-LAVAMAT 76669 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C WOOL/SILK P Hand-washIs rinsed in, spin Additional programme buttons Programme selector Load Water Energy Temperature Consumption dataRun time display What does Update mean? Before the first washPreparing a Wash Load Sorting and preparing a wash loadTypes of Washing and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingSetting the delay timer/soaking time Delay timerChanging the spin speed/Selecting the rinse hold function Changing the spin speedSoak time Opening and closing the doorLoading the washing If using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentIf a time delay has been set Starting a wash programmeIs pressed Washing Programme Progress Programme progress displayMulti-display Stopping the programmeEnd of the wash cycle/removing the washing After the programme has endedIf Rinse Hold has been selected If the Easy Iron programme has been selected WashProgramme tables WashingSeparate conditioning/starching Separate rinsingSeparate spin Type of washing Max. load sizeMaintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorTrouble Shooting Problem Possible Cause RemedyWhat to do if Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Before cleaning the drain pumpDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Setting the additional rinse function Cancelling the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterSetting the water cooling function Cancelling the water cooling functionWater Cooling Additional Rinse and Water CoolingChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation-Site preparation Are supplied with itCover the hole with the cap C Installation on a Suspended Floor Check that the appliance is level using a spirit levelLevelling the Appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Water connection Permanent ConnectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Technical Data DimensionsDimensions in mm Standard guarantee conditions European GuaranteeGreat Britain ExclusionsIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG