Electrolux 76669 manual If the washing results are not satisfactory

Page 35

Operating Instructions

If the washing results are not satisfactory

If the washing turns greyish and limescale deposits are present in the drum

•Insufficient detergent has been added.

•Incorrect detergent was used.

•Stains were not pre-treated.

•Programme or temperature was not set correctly.

•If using modular detergents, the individual components were not used in the correct ratio.

If there are still grey stains on the washing

•Soiled garments with ointments, grease or oils were washed with in- sufficient detergent.

•The temperature selected for the wash was too low.

•A frequent cause is that fabric softener - particularly a concentrated one - has come into contact with the washing. Wash out these types of stains as soon as possible and use the fabric softener carefully.

If after the last rinse foam is still visible

•Modern detergents can still cause foam in the final rinse cycle. How- ever, the washing is still sufficiently rinsed.

If there are white residues on the washing

•These are insoluble contents of modern detergents. They are not the result of an insufficient rinse. Shake out the washing or brush it off. Turn the washing inside out before washing it. Review your choice of detergent and if necessary use liquid detergent.

35

Image 35

Contents ÖKO-LAVAMAT 76669 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control panelIs rinsed in, spin Main wash cycle for delicates at 30 C or 40 CWOOL/SILK P Hand-wash Additional programme buttons Run time display Programme selector Load Water Energy TemperatureConsumption data Before the first wash What does Update mean?Sorting and preparing a wash load Preparing a Wash LoadTypes of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed Setting the delay timer/soaking timeDelay timer Changing the spin speed/Selecting the rinse hold functionLoading the washing Soak timeOpening and closing the door Or for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentIs pressed If a time delay has been setStarting a wash programme Stopping the programme Washing Programme ProgressProgramme progress display Multi-displayIf Rinse Hold has been selected End of the wash cycle/removing the washingAfter the programme has ended Wash If the Easy Iron programme has been selectedWashing Programme tablesType of washing Max. load size Separate conditioning/starchingSeparate rinsing Separate spinMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumWhat to do if Trouble ShootingProblem Possible Cause Remedy Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingIng pumped out, e.g. if the pump is blocked When the water is completely drainedBefore cleaning the drain pump Drain pumpOperating Instructions Helpful to rinse with extra water Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Additional Rinse and Water Cooling Setting the water cooling functionCancelling the water cooling function Water CoolingStarted Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Installation-Site preparationAre supplied with it Levelling the Appliance Installation on a Suspended FloorCheck that the appliance is level using a spirit level Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Water connectionPermanent Connection TerferenceWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Exclusions Standard guarantee conditionsEuropean Guarantee Great BritainIndex Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG