Electrolux 76669 manual If the Easy Iron programme has been selected, Wash

Page 26

Operating Instructions

If the EASY IRON programme has been selected:

For EASY IRON, following the end of the programme an anti-crease phase of approx. 30 minutes is performed. During this time the multi- display shows the time remaining (e.g. 1 minute) and the END display will illuminate.

You can remove the washing at any time during the anti-crease phase.

01. To do this, press the START/PAUSE button

The door can now be opened and the washing removed.

2.Then turn the programme selector to OFF. The wash programme has ended.

3	If the OVERDOSING indicator illuminates, then too

	much detergent was used in the washing programme
	just completed. Observe the dosing recommendations
	of the detergent manufacturer as well as the load quantity for the next
	wash.

Important! If the washing machine is not to be used for a long period: Close the water tap and disconnect the washing machine from the electricity mains.

Image 26

Contents ÖKO-LAVAMAT 76669 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Control panel Programme selectorIs rinsed in, spin Main wash cycle for delicates at 30 C or 40 CWOOL/SILK P Hand-wash Additional programme buttons Run time display Programme selector Load Water Energy TemperatureConsumption data What does Update mean? Before the first washPreparing a Wash Load Sorting and preparing a wash loadTypes of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed/Selecting the rinse hold function Setting the delay timer/soaking timeDelay timer Changing the spin speedLoading the washing Soak timeOpening and closing the door Compartment for pre-wash/soaking detergent If using liquid detergent / tabletsAdd detergent / conditioner Or for water softening agentIs pressed If a time delay has been setStarting a wash programme Multi-display Washing Programme ProgressProgramme progress display Stopping the programmeIf Rinse Hold has been selected End of the wash cycle/removing the washingAfter the programme has ended If the Easy Iron programme has been selected WashProgramme tables WashingSeparate spin Separate conditioning/starchingSeparate rinsing Type of washing Max. load sizeMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorWhat to do if Trouble ShootingProblem Possible Cause Remedy Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterDrain pump When the water is completely drainedBefore cleaning the drain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Additional Rinse RINSE+ Setting the additional rinse functionCancelling the additional rinse function Helpful to rinse with extra waterWater Cooling Setting the water cooling functionCancelling the water cooling function Additional Rinse and Water CoolingWashing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Installation-Site preparationAre supplied with it Levelling the Appliance Installation on a Suspended FloorCheck that the appliance is level using a spirit level Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Terference Water connectionPermanent Connection UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Great Britain Standard guarantee conditionsEuropean Guarantee ExclusionsIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

If the EASY IRON programme has been selected:

wash.