Operating Instructions
Soak time
If the SOAKING button is pressed you can use the DELAY TIMER button to increase the soak time by 1 to a maximum of 19 hours.
3 Without the delay timer, the soak time is approx. 1 hour.
Opening and closing the door
0 Open: Pull the handle on the door.
0Close: Press the door firmly closed.
The displays DOOR and START/PAUSE show when the appliance is switched on whether the door can be opened:
| DOOR Indicator | Display START/PAUSE | Door opening possible? |
| lights up green | flashes red | yes |
| lights up red | lights up red | no1) |
| 1) The door is locked because of a high water level or high temperature | ||
3 | If |
|
|
| – the the error code Cd appears in the multi display, | ||
–and the PRE WASH, RINSE and RINSE+ displays are flashing,
an attempt was made to start a washing programme without the door being correctly closed. In this case, press the door firmly closed and start the washing programme again.
Loading the washing
3 | See "Programme Tables" for maximum loads. |
| For information about the correct preparation of the washing see "Sort |
and prepare washing".
01. Sort and prepare the washing according to type.
2.Open the door: Pull the handle on the door.
3. Load the washing.
Important! Do not trap washing when closing the door. The fabrics and the ma- chine could be damaged.
4. Close the door firmly.
21