Electrolux 76669 manual Inlet Hose Connection

Page 49

Installation and connection instructions

Inlet Hose Connection

A pressure hose of 1.35m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections is permissible, available from AEG Service Force Centres.

Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without Aqua-Control.

Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua-Control.

Important! Never cut into pieces in order to extend the hoses!

3

Sealing rings are supplied either in the plastic

 

nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Important!

– Do not lay the inlet hose verti- cally downwards, instead run it to the right or left as shown in the diagram.

– Tighten firmly to prevent leakage but do not use excessive force.

2. Connect the hose with the straight connection to a water tap with a screw thread R 3/4 (inches) Important! Only tighten the screw connection by hand.

3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.

49

Image 49
Contents ÖKO-LAVAMAT 76669 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelWOOL/SILK P Hand-wash Main wash cycle for delicates at 30 C or 40 CIs rinsed in, spin Additional programme buttons Consumption data Programme selector Load Water Energy TemperatureRun time display Before the first wash What does Update mean?Sorting and preparing a wash load Preparing a Wash LoadTypes of Washing and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeDelay timer Setting the delay timer/soaking timeChanging the spin speed/Selecting the rinse hold function Changing the spin speedOpening and closing the door Soak timeLoading the washing Add detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentStarting a wash programme If a time delay has been setIs pressed Programme progress display Washing Programme ProgressMulti-display Stopping the programmeAfter the programme has ended End of the wash cycle/removing the washingIf Rinse Hold has been selected Wash If the Easy Iron programme has been selectedWashing Programme tablesSeparate rinsing Separate conditioning/starchingSeparate spin Type of washing Max. load sizeMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorProblem Possible Cause Remedy Trouble ShootingWhat to do if Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingBefore cleaning the drain pump When the water is completely drainedDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Cancelling the additional rinse function Setting the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterCancelling the water cooling function Setting the water cooling functionWater Cooling Additional Rinse and Water CoolingCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Installation-Site preparationCover the hole with the cap C Check that the appliance is level using a spirit level Installation on a Suspended FloorLevelling the Appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Water connectionTerference UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical DataDimensions in mm European Guarantee Standard guarantee conditionsGreat Britain ExclusionsIndex Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG