Electrolux 76669 Washing Machine Drum, Main door, Maintenance Wash, To run a maintenance wash

Page 30

Operating Instructions

7.Use a brush to clean the entire compartment area of the washing

machine, particularly also the nozzles on the top side of the compartment.

8.Set the detergent dispensing drawer into the guide tracks and push it in.

Washing Machine Drum

The washing machine drum is made from rust-free stainless steel. Any objects left in the laundry which are likely to rust can stain the drum.

Important! Do not clean the stainless steel drum with descaling agents containing acids, scouring agents containing chlorine or iron, or steel wool. Your local AEG Service Force Centre has suitable agents available.

0Remove any rust stains on the drum using a stainless steel cleaning agent.

	Maintenance Wash
3	With the use of low temperature washes it is possible to get a build up
	of residues inside the drum.
	We recommend that a maintenance wash be performed on a regular
	basis.

To run a maintenance wash:

The drum should be empty of laundry.

01. Select the hottest cotton wash programme.

2.Use a normal measure of detergent, must be a powder.

Main door

0Regularly check to see if there are deposits or foreign objects in the rubber seal behind the door, and remove them.

30

Image 30

Contents ÖKO-LAVAMAT 76669 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C WOOL/SILK P Hand-washIs rinsed in, spin Additional programme buttons Programme selector Load Water Energy Temperature Consumption dataRun time display What does Update mean? Before the first washPreparing a Wash Load Sorting and preparing a wash loadTypes of Washing and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed/Selecting the rinse hold function Setting the delay timer/soaking timeDelay timer Changing the spin speedSoak time Opening and closing the doorLoading the washing Compartment for pre-wash/soaking detergent If using liquid detergent / tabletsAdd detergent / conditioner Or for water softening agentIf a time delay has been set Starting a wash programmeIs pressed Multi-display Washing Programme ProgressProgramme progress display Stopping the programmeEnd of the wash cycle/removing the washing After the programme has endedIf Rinse Hold has been selected If the Easy Iron programme has been selected WashProgramme tables WashingSeparate spin Separate conditioning/starchingSeparate rinsing Type of washing Max. load sizeMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorTrouble Shooting Problem Possible Cause RemedyWhat to do if Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterDrain pump When the water is completely drainedBefore cleaning the drain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Additional Rinse RINSE+ Setting the additional rinse functionCancelling the additional rinse function Helpful to rinse with extra waterWater Cooling Setting the water cooling functionCancelling the water cooling function Additional Rinse and Water CoolingWashing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation-Site preparation Are supplied with itCover the hole with the cap C Installation on a Suspended Floor Check that the appliance is level using a spirit levelLevelling the Appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Terference Water connectionPermanent Connection UserWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Technical Data DimensionsDimensions in mm Great Britain Standard guarantee conditionsEuropean Guarantee ExclusionsIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG